JB/T 5722-1991Woodworking band saws with log carriage - Structural safety (English PDF)
跑车木工带锯机 结构安全
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 5722-1991 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
October 4, 1991
Implementation date
July 1, 1992
Scope
JB/T 5722-1991 is the English-translated version of 跑车木工带锯机 结构安全.
JB/T 5722-1991 is a recommended machinery industry standard of China on the structural safety of woodworking band saws fitted with a log carriage.
It states the general requirements first and then the particular ones: the guards and protective devices, the operating mechanism, the braking mechanism, the saw tensioning and blade clamping arrangements, the chip removal device, and the equipment carried on the carriage itself.
The standard applies to carriage type woodworking band sawing machines. It quotes GB 12557 and GB 699, and it was drawn up with non-equivalent reference to JIS B6607-83. Issued on 4 October 1991, it has applied since 1 July 1992.
Found what you need?
Document preview — JB/T 5722-1991
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 5722-1991 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 4 October 1991 and has been in force since 1 July 1992.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is a recommended machinery industry standard of China on the structural safety of woodworking band saws fitted with a log carriage. It states the general requirements first and then the particular ones: the guards and protective devices, the operating mechanism, the braking mechanism, the saw tensioning and blade clamping arrangements, the chip removal device, and the equipment carried on the carriage itself. The standard applies to carriage type woodworking band sawing machines. It quotes GB 12557 and GB 699, and it was drawn up with non-equivalent reference to JIS B6607-83.
JB/T 5722-1991 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,316 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 Normative references
GB 12557
GB 699
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Classification and status
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download JB/T 5722-1991
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
JB/T 5722-1991
$189.00