JB/T 50070-2002Electricity meters - Reliability requirements and assessment methods (English PDF)
电能表 可靠性要求及考核方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 50070-2002 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 27, 2002
Implementation date
April 1, 2003
Scope
JB/T 50070-2002 is the English-translated version of 电能表 可靠性要求及考核方法.
JB/T 50070-2002 is the Chinese machinery industry standard covering electricity meters - Reliability requirements and assessment methods. It was issued on 27 December 2002 and has been in force since 1 April 2003, replacing JB/T 50070-1995.
The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2002 edition.
The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — JB/T 50070-2002
National Standard of the People's Republic of China
- Replacing
- JB/T 50070-1995
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 50070-2002 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 27 December 2002 and has been in force since 1 April 2003.
It replaces the earlier edition JB/T 50070-1995.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
JB/T 50070-2002 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,922 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
4 Related standards
Other editions:
JB/T 50070-1995 (earlier edition)
Standards on related subjects:
GB/T 17215.321-2021 — Electricity metering equipment (AC) - Particular requirements - Part 21: Static meters for active energy(classes A, B, C, D and E)
GB/T 34067.2-2019 — In-home display terminal for smart-utilization power—Part 2: Data exchange
GB/T 31983.11-2015 — Narrow band power line communication over low-voltage mains—Part 11: 3 kHz to 500 kHz frequency bands and classifications, limits of output level and electromagnetic disturbances
JB/T 10923-2020 — Latching relays for electricity meters
5 Classification and status
Chinese Standard Classification (CCS): N 22
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
Editions of JB/T 50070
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 50070-2002 | Electricity meters - Reliability requirements and assessment methods | current edition | Current |
| JB/T 50070-1995 | Electricity meters - Reliability requirements and assessment methods | previous edition | Superseded |
This page sells the current edition, JB/T 50070-2002. Earlier editions are listed for reference only.
How to Download JB/T 50070-2002
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
JB/T 50070-2002
$225.00