JB/T 4210.3-2014Cold heading dies for hexagon nuts - Part 3: Sizing ejector pins (English PDF)
六角螺母冷镦模 第3部分：整形顶杆
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 4210.3-2014 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
July 9, 2014
Implementation date
November 1, 2014
Scope
JB/T 4210.3-2014 is the English-translated version of 六角螺母冷镦模 第3部分：整形顶杆.
JB/T 4210.3-2014 is the Chinese machinery industry standard, recommended in status, that covers sizing ejector pins in cold heading dies for hexagon nuts. It lays down the structural types and dimensions of the pin together with its material, its hardness and the marking requirements that go with it.
The part serves hexagon nut cold heading dies used on automatic nut cold heading machines. Its Chinese classification is J46 and its international classification is 25.120.30, and the standards it draws on are GB/T 6170-2000, GB/T 6171-2000, GB/T 6175-2000, GB/T 6176-2000 and JB/T 4213.
It takes the place of JB/T 4210.3-1996. Issued on 9 July 2014, it has applied since 1 November 2014.
Found what you need?
Document preview — JB/T 4210.3-2014
National Standard of the People's Republic of China
- ICS
- 25.120.30
- Replacing
- JB/T 4210.3-1996
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- Scope
- Normative references
- About this standard
- Related standards
- Classification and status
1 Foreword
JB/T 4210.3-2014 was issued by MIIT on 9 July 2014 and has been in force since 1 November 2014.
It replaces the earlier edition JB/T 4210.3-1996.
It is one of 35 parts of the JB/T 4210 series.
2 Scope
This standard is the Chinese machinery industry standard, recommended in status, that covers sizing ejector pins in cold heading dies for hexagon nuts. It lays down the structural types and dimensions of the pin together with its material, its hardness and the marking requirements that go with it. The part serves hexagon nut cold heading dies used on automatic nut cold heading machines. Its Chinese classification is J46 and its international classification is 25.120.30, and the standards it draws on are GB/T 6170-2000, GB/T 6171-2000, GB/T 6175-2000, GB/T 6176-2000 and JB/T 4213. It takes the place of JB/T 4210.3-1996.
3 Normative references
JB/T 4210.3-2014 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 6170-2000
GB/T 6171-2000
GB/T 6175-2000
GB/T 6176-2000
JB/T 4213
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Related standards
Other parts of this standard:
JB/T 4210.1-1996 — Dies for cold heading hexagon nuts - Sizing punches
JB/T 4210.1-2014 — Cold Heading Dies for Hexagon Nuts - Part 1: Sizing Punches
JB/T 4210.2-1996 — Dies for cold heading hexagon nuts - Sizing dies
JB/T 4210.2-2014 — Cold Heading Dies for Hexagon Nuts - Part 2: Sizing Dies
JB/T 4210.4-1996 — Dies for cold heading hexagon nuts - Ball heading punches - Type A
JB/T 4210.4-2014 — Part 4: Punches for ball upsetting
JB/T 4210.5-1996 — Dies for cold heading hexagon nuts - Ball heading punches - Type B
JB/T 4210.5-2014 — Part 5: Dies for ball upsetting
JB/T 4210.6-1996 — Dies for cold heading hexagon nuts - Ball heading dies - Type A
JB/T 4210.6-2014 — Cold Heading Dies for Hexagon Nuts - Part 6: Ejector Pins for Ball Upsetting
JB/T 4210.7-1996 — Dies for cold heading hexagon nuts - Ball heading dies - Type B
JB/T 4210.7-2014 — Cold Heading Dies for Hexagon Nuts - Part 7: Upper Punches for Hexagon Upsetting
JB/T 4210.8-1996 — Dies for cold heading hexagon nuts - Ball heading ejector pins - Type A
JB/T 4210.8-2014 — Cold Heading Dies for Hexagon Nuts - Part 8: Lower Punches for Hexagon Upsetting
JB/T 4210.9-1996 — Dies for cold heading hexagon nuts - Ball heading ejector pins - Type B
JB/T 4210.9-2014 — Cold Heading Dies for Hexagon Nuts - Part 9: Dies for Hexagon Upsetting
JB/T 4210.10-1996 — Dies for cold heading hexagon nuts - Hexagon heading upper punches - Type A
JB/T 4210.10-2014 — Cold Heading Dies for Hexagon Nuts - Part 10: Punches for Piercing
JB/T 4210.11-1996 — Dies for cold heading hexagon nuts - Hexagon heading upper punches - Type B
JB/T 4210.11-2014 — Cold Heading Dies for Hexagon Nuts - Part 11: Dies for Piercing
JB/T 4210.12-1996 — Dies for cold heading hexagon nuts - Hexagon heading lower punches - Type A
JB/T 4210.13-1996 — Dies for cold heading hexagon nuts - Hexagon heading lower punches - Type B
JB/T 4210.14-1996 — Dies for cold heading hexagon nuts - Hexagon heading dies (cemented carbide) - Type A
JB/T 4210.15-1996 — Dies for cold heading hexagon nuts - Hexagon heading dies (cemented carbide) - Type B
JB/T 4210.16-1996 — Dies for cold heading hexagon nuts - Hexagon heading dies (six-segment cemented carbide) - Type C
JB/T 4210.17-1996 — Dies for cold heading hexagon nuts - Hexagon heading dies - Type D
JB/T 4210.18-1996 — Dies for cold heading hexagon nuts - Piercing punches - Type A
JB/T 4210.19-1996 — Dies for cold heading hexagon nuts - Piercing punches - Type B
JB/T 4210.20-1996 — Dies for cold heading hexagon nuts - Piercing punches - Type C
JB/T 4210.21-1996 — Dies for cold heading hexagon nuts - Piercing punches - Type D
JB/T 4210.22-1996 — Dies for cold heading hexagon nuts - Piercing dies - Type A
JB/T 4210.23-1996 — Dies for cold heading hexagon nuts - Piercing dies - Type B
JB/T 4210.24-1996 — Dies for cold heading hexagon nuts - Piercing dies - Type C
JB/T 4210.25-1996 — Dies for cold heading hexagon nuts - Piercing dies - Type D
Other editions:
JB/T 4210.3-1996 (earlier edition)
6 Classification and status
International classification (ICS): 25.120.30
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of JB/T 4210.3
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 4210.3-2014 | Cold heading dies for hexagon nuts - Part 3: Sizing ejector pins | current edition | Current |
| JB/T 4210.3-1996 | Cold heading dies for hexagon nuts - Part 3: Sizing ejector pins | previous edition | Superseded |
This page sells the current edition, JB/T 4210.3-2014. Earlier editions are listed for reference only.
How to Download JB/T 4210.3-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 4213-1996 — Cold heading dies for fasteners - Technical specifications
JB/T 4213-2014 — Cold Heading Dies for Fasteners - Specifications
JB/T 4210.4-2014 — Cold heading dies for hexagon nuts - Part 4: Punches for ball upsetting
Secure payment via Stripe
Payments accepted
JB/T 4210.3-2014
$110.00