JB/T 20115-2009Stretch blow molding machines for polypropylene infusion bottles (English PDF)
聚丙烯输液瓶拉伸吹塑成型机
This is a limited preview
Buy now to download the full PDF (23 pages)
Need quotation for your management?
Get a formal quotation for JB/T 20115-2009 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
January 1, 2009
Implementation date
January 1, 2009
Scope
JB/T 20115-2009 is the English-translated version of 聚丙烯输液瓶拉伸吹塑成型机.
JB/T 20115-2009 is a recommended standard of the Chinese mechanical and machinery industry, written for the stretch blow molding machines that produce polypropylene infusion bottles.
It gives the terms and definitions, the classification and the requirements for such machines, the test methods and the inspection rules, and the provisions for marking, instructions for use, packaging, transport and storage.
It applies to machines that stretch and blow a preform into a finished polypropylene infusion bottle.
Its references include GB/T 191, GB 5226.1-2002, GB/T 6388, GB/T 7932-2003, GB 9969.1, GB/T 10111, GB/T 13306, GB/T 13384 and GB/T 16769-2008, together with the medical and pharmaceutical packaging standards YY/T 0216-1995, YY 0242-1996 and YBB 0002-2002. It was issued on 1 January 2009.
Found what you need?
Document preview — JB/T 20115-2009
National Standard of the People's Republic of China
- ICS
- 11.120.30
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 20115-2009 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 17 November 2009.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 23 pages in English translation.
2 Scope Preview
This standard is a recommended standard of the Chinese mechanical and machinery industry, written for the stretch blow molding machines that produce polypropylene infusion bottles. It gives the terms and definitions, the classification and the requirements for such machines, the test methods and the inspection rules, and the provisions for marking, instructions for use, packaging, transport and storage. It applies to machines that stretch and blow a preform into a finished polypropylene infusion bottle. Its references include GB/T 191, GB 5226.1-2002, GB/T 6388, GB/T 7932-2003, GB 9969.1, GB/T 10111, GB/T 13306, GB/T 13384 and GB/T 16769-2008, together with the medical and pharmaceutical packaging standards YY/T 0216-1995, YY 0242-1996 and YBB 0002-2002. It was issued on 1 January 2009.
JB/T 20115-2009 falls under ICS 11.120.30, in the field of health care technology.
This catalogue holds 125 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 191
GB 5226.1-2002 — Safety of machinery - Electrical equipment of machines - Part 1: General requirements
GB/T 6388
GB/T 7932-2003 — Pneumatic fluid power - General rules relating to systems
GB 9969.1
GB/T 10111
GB/T 13306
GB/T 13384
GB/T 16769-2008 — Metal-cutting machine tools -- Measurement method of sound pressure level
YY/T 0216-1995 — Method for compiling model designations of pharmaceutical machinery products
YY 0242-1996 — Special polypropylene compounds for medical infusion, blood transfusion and syringes
YBB 0002-2002 — PP Infusion Bottles
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 23 pages
5 Classification and status
International classification (ICS): 11.120.30
Chinese Standard Classification (CCS): C 92
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 23 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB 5226.1-2002Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
- GB/T 6388Transport package shipping mark
- GB/T 7932-2003Pneumatic fluid power -- General rules and safety requirements for systems and their components
- GB 9969.1General principles for preparation of instructions for use of industrial products
- GB/T 10111Generation of random numbers and procedures applied to sampling inspection for product quality
Similar standards
How to Download JB/T 20115-2009
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 5226.1-2002 — Safety of machinery - Electrical equipment of machines - Part 1: General requirements
GB 9969.1-1998 — General principles for preparation of instructions for use of industrial products
GB/T 10111-1988 — Methods for random sampling by utilizing dices of random number
JB/T 20115-2009
$145.00