JB/T 20142-2011Integrated washing, filling, stoppering and capping machines for glass infusion bottles (English PDF)
玻璃输液瓶洗灌塞封一体机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 20142-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
August 15, 2011
Implementation date
November 1, 2011
Scope
JB/T 20142-2011 is the English-translated version of 玻璃输液瓶洗灌塞封一体机.
JB/T 20142-2011 is a recommended Chinese machinery industry standard for the integrated machines that wash, fill, stopper and seal glass infusion bottles.
It sets the model designation and marking of the machine, the requirements, the test methods and the inspection rules, and it goes on to the provisions for packaging, the operating manual, marking, transport and storage.
Machines handling glass infusion bottles of 50 ml to 500 ml are what it applies to. Its classification is C92 in the Chinese scheme and 11.120.30 in the international scheme.
Among the standards it quotes are GB/T 2639-2008, GB 5226.1-2008, GB/T 7932-2003, GB/T 16769 and YY/T 0216-1995.
Found what you need?
Document preview — JB/T 20142-2011
National Standard of the People's Republic of China
- ICS
- 11.120.30
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 20142-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 15 August 2011 and has been in force since 1 November 2011.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard for the integrated machines that wash, fill, stopper and seal glass infusion bottles. It sets the model designation and marking of the machine, the requirements, the test methods and the inspection rules, and it goes on to the provisions for packaging, the operating manual, marking, transport and storage. Machines handling glass infusion bottles of 50 ml to 500 ml are what it applies to. Its classification is C92 in the Chinese scheme and 11.120.30 in the international scheme. Among the standards it quotes are GB/T 2639-2008, GB 5226.1-2008, GB/T 7932-2003, GB/T 16769 and YY/T 0216-1995.
JB/T 20142-2011 falls under ICS 11.120.30, in the field of health care technology.
This catalogue holds 125 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 191
GB/T 2639-2008 — Infusion glass bottles
GB 5226.1-2008 — Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
GB/T 6388
GB/T 7932-2003 — Pneumatic fluid power - General rules relating to systems
GB/T 9969
GB/T 10111
GB/T 13306
GB/T 13384
GB/T 16769
YBB 00032005
YBB 00042005
YBB 00012004
YBB 00022005-2
YBB 00052002 — Bromobutyl Rubber Closures
YBB 00292003 — Infusion bottles made of borosilicate glass
YY/T 0216-1995 — Method for compiling model designations of pharmaceutical machinery products
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 36030-2018 — General technical requirements of CIP and SIP for pharmaceutical machinery
JB/T 20032-2012 — Series vacuum freezing dryer for pharmaceutics
JB/T 20104-2007 — Tablet hardness testers
JB/T 20134-2020 — Pharmaceutical hopper lifters
JB/T 20152-2013 — Planet Type Mix Machine
JB/T 20151-2013 — Plastic Ampoule Blow-fill-seal Machine
6 Classification and status
International classification (ICS): 11.120.30
Chinese Standard Classification (CCS): C 92
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 2639-2008Infusion glass bottles
- GB 5226.1-2008Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
- GB/T 6388Transport package shipping mark
- GB/T 7932-2003Pneumatic fluid power -- General rules and safety requirements for systems and their components
- GB/T 9969General principles for preparation of instructions for use of industrial products
YBB 00022005-2 · YBB 00052002 · YBB 00292003
Similar standards
How to Download JB/T 20142-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 5226.1-2008 — Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
GB/T 10111-1988 — Methods for random sampling by utilizing dices of random number
GB/T 10111-2008 — Generation of random numbers and procedures applied to sampling inspection for product quality
JB/T 20142-2011
$195.00