Valid

JB/T 20095-2014Integrated washing, filling and sealing machines for large volume injections in plastic bottles (English PDF)

塑料瓶大容量注射剂洗灌封一体机

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 20095-2014 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

December 24, 2014

Implementation date

June 1, 2015

Scope

JB/T 20095-2014 is the English-translated version of 塑料瓶大容量注射剂洗灌封一体机.

JB/T 20095-2014 belongs to the pharmaceutical machinery group of the Chinese machinery industry standards and deals with integrated washing, filling and sealing machines for large volume injections packed in plastic bottles.

It specifies the model designation of these machines and their requirements, test methods and inspection rules, together with signs, instructions for use, packaging, transport and storage.

The machines in view handle plastic bottle containers on a single line from washing through filling to sealing. Its text quotes GB/T 191, GB 5226.1-2008, GB/T 6388, GB/T 9969, GB/T 10111, GB/T 13306, GB/T 13384, GB/T 16292-2010, GB/T 16769, GB/T 24342-2009, YBB 00012002, YBB 00022002, YBB 00242004 and YY/T 0216-1995.

The standard supersedes JB/T 20095-2007. Issued on 24 December 2014, it has applied since 1 June 2015.

Found what you need?

Document preview — JB/T 20095-2014

National Standard of the People's Republic of China

ICS
11.120.30
Replacing
JB/T 20095-2007

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Model designation
  • 6 Test methods
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 8 Marking, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 Packaging

1 Foreword

JB/T 20095-2014 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 24 December 2014 and has been in force since 1 June 2015.

It replaces the earlier edition JB/T 20095-2007.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

JB/T 20095-2014 belongs to the pharmaceutical machinery group of the Chinese machinery industry standards and deals with integrated washing, filling and sealing machines for large volume injections packed in plastic bottles. It specifies the model designation of these machines and their requirements, test methods and inspection rules, together with signs, instructions for use, packaging, transport and storage. The machines in view handle plastic bottle containers on a single line from washing through filling to sealing. Its text quotes GB/T 191, GB 5226.1-2008, GB/T 6388, GB/T 9969, GB/T 10111, GB/T 13306, GB/T 13384, GB/T 16292-2010, GB/T 16769, GB/T 24342-2009, YBB 00012002, YBB 00022002, YBB 00242004 and YY/T 0216-1995. The standard supersedes JB/T 20095-2007.

JB/T 20095-2014 falls under ICS 11.120.30, in the field of health care technology.

This catalogue holds 125 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

GB/T 191

GB 5226.1-2008 — Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements

GB/T 6388

GB/T 9969

GB/T 10111

GB/T 13306

GB/T 13384

GB/T 16292-2010 — Test method for airborne particles in clean room(zone) of the pharmaceutical industry

GB/T 16769

GB/T 24342-2009 — Electrical equipment of industrial machines - Continuity of the protective bonding circuit test specifications

YBB 00012002 — LDPE Infusion Bottles

YBB 00022002 — PP Infusion Bottles

YBB 00242004 — Suliaoshuyerongqiyong Jübingxi Zuhegai(Lahuanshi) Combinational Closures for Plastic Infusion Containers(with pull open cap)

YY/T 0216-1995 — Method for compiling model designations of pharmaceutical machinery products

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Other editions:

JB/T 20095-2007 (earlier edition)

Standards on related subjects:

GB/T 36030-2018 — General technical requirements of CIP and SIP for pharmaceutical machinery

JB/T 20032-2012 — Series vacuum freezing dryer for pharmaceutics

JB/T 20104-2007 — Tablet hardness testers

JB/T 20100-2022 — Pharmaceutical rubber stopper washing machines

JB/T 20099-2022 — Pharmaceutical filter-washer-dryers

JB/T 20098-2022 — Liquid filling lines for antibiotic glass vials

6 Classification and status

International classification (ICS): 11.120.30

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of JB/T 20095

EditionTitleRevisionStatus
JB/T 20095-2014Integrated washing, filling and sealing machines for large volume injections in plastic bottlescurrent editionCurrent
JB/T 20095-2007Integrated washing, filling and sealing machines for large volume injections in plastic bottlesprevious editionSuperseded

This page sells the current edition, JB/T 20095-2014. Earlier editions are listed for reference only.

How to Download JB/T 20095-2014

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 20095-2014

$339.00