JB/T 20089-2021Medicinal material steaming cabinets (English PDF)

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009.

This standard replaces JB/T 20089-2006. Compared with JB/T 20089-2006, the main technical changes of this standard are as follows.

--- Modified the model compilation (see 3.2.1, 4.3.1 of the 2006 edition);

--- Modified the marking example (see 3.2.2, 4.3.2 of the 2006 edition);

--- Revised the material requirements (see 4.1, 5.1.1 of the 2006 edition);

--- Modified the surface quality (see 4.2, 5.1.2 of the 2006 edition);

--- Revised the requirements for overpressure relief devices (see 4.3.5, 5.3.5 of the 2006 edition);

--- Modified the insulation requirements (see 4.3.6, 5.3.6 of the 2006 edition);

--- Modified the electrical safety requirements (see 4.4, 5.4 of the 2006 edition);

--- Modified the material test (see 5.1, 6.1.1 of the 2006 edition);

--- Modified the surface quality test (see 5.2, 6.1.2 of the 2006 edition);

--- Modified the insulation test (see 5.3.6, 6.3.6 of the 2006 edition);

--- Modified the electrical safety test (see 5.4, 6.4 of the 2005 edition);

--- Modified sampling (see 6.3.3, 7.3.3 of the 2006 edition);

--- Deleted terms and definitions (see Chapter 3 of the 2006 edition);

--- Deleted the specification series (see 4.2 of the 2006 edition);

--- Removed configuration requirements (see 5.2 of the 2006 edition);

--- Increased temperature control requirements and tests (see 4.3.8, 5.3.8).

1 Scope

This standard specifies the classification and marking, requirements, test methods, inspection rules and markings, instructions for use, packaging, transportation and storage.

This standard applies to the steam processing of animal and plant medicinal materials, the steam pressure is not more than 0.03MPa, and the design pressure is not more than 0.03MPa. Side door box type medicine steamer.

2 Normative references

The following documents are essential for the application of this document. For dated references, only the dated version applies to this document. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 191 Graphical signs of packaging, storage and transportation

GB/T 6388 Receipt and Delivery Marks for Transport Packaging

GB/T 9969 General Principles of Instruction Manual for Industrial Products

GB/T 10111 Generation of random numbers and its application in product quality sampling inspection

GB/T 13306 Signs

GB/T 13384-2008 General technical conditions for packaging of mechanical and electrical products

GB/T 36035 General Requirements for Electrical Safety of Pharmaceutical Machinery

JB/T 20188-2017 Preparation method of pharmaceutical machinery product model

3 Classification and marking