JB/T 12579-2015Multi-function high-efficiency aeration devices (English PDF)
多功能高效曝气装置
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 12579-2015 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
October 10, 2015
Implementation date
March 1, 2016
Scope
JB/T 12579-2015 is the English-translated version of 多功能高效曝气装置.
JB/T 12579-2015 is the Chinese machinery industry standard for the multifunction high-efficiency aerator. It specifies the terminology and definitions, the model and specifications, the technical requirements, the test methods, the inspection rules and the provisions for marking, packaging, transport and storage of these aeration devices.
The standard applies to multifunction high-performance aeration devices driven by a motor and reducer and used in aerobic biochemical water treatment processes.
It is classified J88 in China. The document was issued on 10 October 2015 by the Ministry of Industry and Information Technology and became effective on 1 March 2016.
Found what you need?
Document preview — JB/T 12579-2015
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Model and specifications
- 4.1 Model
- 4.2 Specifications
- 5 Technical requirements
- 5.1 Requirements on the working environment
- 5.2 Basic requirements
- 5.3 Requirements on the complete machine
- 5.4 Requirements on the working performance
- 6 Test methods
- 7 Inspection rules
- 7.1 Factory inspection
- 7.2 Type test
- 8 Identification, packaging, transport and storage
- 8.1 Identification
- 8.2 Packaging
- 8.3 Transport and storage
- Annex A (normative) Detection of the form and position deviations of the impeller
- A.1 Detection of the form and position deviations of the impeller body and of the blades
- A.2 Detection of the axial run-out of the impeller body and of the blades
- Annex B (normative) Test methods of the theoretical power efficiency and of the energy efficiency ratio
- B.1 Test conditions
- B.2 Test steps
- B.3 Overall oxygen transfer coefficient
- B.4 Oxygenation capacity (SOTR)
- B.5 Total electrical energy consumed overall
- B.6 Theoretical power efficiency
- B.7 Energy efficiency ratio
- Figure A.1 Diagram of the detection of the form and position deviations
- Figure A.2 Diagram of the detection of the axial run-out
- Table 1 Specifications and models of the multifunctional high efficiency aeration device
3 Terms and definitions
4 Model and specifications
5 Technical requirements
6 Test methods
7 Inspection rules
8 Identification, packaging, transport and storage
Foreword
This document was issued on 10 October 2015 by the Ministry of Industry and Information Technology of the People's Republic of China, and has been in force since 1 March 2016.
It is the first edition of this standard.
About this edition
JB/T 12579-2015 is the first edition of this standard. It was issued on 10 October 2015 and has been in force since 1 March 2016.
There is no earlier edition to compare it with, so a specification that has to refer to this subject can only cite JB/T 12579-2015 itself.
The interval between issue and effect is the transition period. It exists so that producers, laboratories and buyers can requalify products, revise procedures and use up documentation before the new text becomes the one that applies. The date on this page is the official one announced by the Ministry of Industry and Information Technology of the People's Republic of China.
Edition history and citation
JB/T 12579-2015 is a first edition: there is no earlier version of this standard, so a document that needs to refer to this subject can only cite JB/T 12579-2015 itself.
Where an edition is replaced, the Chinese standardization system keeps the number and changes the year: the number identifies the subject, the year identifies the text. That is why a citation without a year is ambiguous and a citation with one is not.
Classification and status
JB/T 12579-2015 carries no ICS number in the official record.
The JB/T prefix marks a recommended standard of China's machinery industry, issued by the Ministry of Industry and Information Technology. It is not, in itself, law: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
How this standard is designated
The full designation is JB/T 12579-2015. A citation should carry the number with its year, because the year identifies the text that applies.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download JB/T 12579-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
JB/T 12579-2015
$279.00