Valid

GB/T 38220-2019Technical requirements of assessment for high efficiency water pollutants control equipment—Rotary aerator (English PDF)

高效能水污染物控制装备评价技术要求 旋转曝气机

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 38220-2019 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

October 18, 2019

Implementation date

May 1, 2020

Scope

GB/T 38220-2019 is the English-translated version of 高效能水污染物控制装备评价技术要求 旋转曝气机.

GB/T 38220-2019 is the Chinese standard "Technical requirements of assessment for high efficiency water pollutants control equipment - Rotary aerator". Its scope clause reads: This Standard specifies terms and definitions, assessment requirements, test methods, calculation methods and assessment methods for high efficiency rotary aerator.

This Standard is applicable to rotary aerator of vertical shaft, rotary aerator of horizontal shaft and impeller aerator of self-suction that is driven by motor and used for various industrial wastewater, municipal wastewater treatment processes and water reoxygenation.

Its clauses include terms and definitions; assessment requirements; test methods; calculation method; assessment method. It was issued by the State Administration for Market Regulation on OCTOBER 18, 2019 and took effect on MAY 01, 2020.

Found what you need?

Document preview — GB/T 38220-2019

National Standard of the People's Republic of China

ICS
13.030.40
Classification
J 88

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword3
  • 1 Scope4
  • 2 Normative references4
  • 3 Terms and definitions5
  • 4 Assessment requirements5
  • 5 Test methods6
  • 6 Calculation method7
  • 7 Assessment method7

1 Scope

This Standard specifies terms and definitions, assessment requirements, test methods, calculation methods and assessment methods for high efficiency rotary aerator.

This Standard is applicable to rotary aerator of vertical shaft, rotary aerator of horizontal shaft and impeller aerator of self-suction that is driven by motor and used for various industrial wastewater, municipal wastewater treatment processes and water reoxygenation.

2 Normative references

The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

GB/T 3768, Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane

GB 18613, Minimum allowable values of energy efficiency and energy efficiency grades for small and medium three-phase asynchronous motors

GB/T 27872, Submersible aerator

CJ/T 294, Rotating disc aerator

JB/T 8700, Technical specifications to rotor aerator with horizontal shaft used in oxidation ditch

JB/T 12579, Mufti-function high-efficient aerator

3 Terms and definitions

For the purposes of this document, the following terms and definitions apply.

3.1 High efficiency rotary aerator

A rotary aerator with safe and reliable operation, superior oxygenation performance and leading energy efficiency within a comparable range with same kind.

3.2 Energy efficiency ratio for rotary aerator

Under specified testing conditions, the ratio of the amount of oxygen delivered to the clean water of which the dissolved oxygen is zero per unit time of the rotary aerator to the total energy consumed by the whole machine.

3.3 Rotary aerator of vertical shaft

A surface aerator that the axis of rotation of the aeration impeller is perpendicular to the horizontal plane.

3.4 Rotary aerator of horizontal shaft

A surface aerator that the axis of rotation of the aeration impeller is parallel to the horizontal plane.

3.5 Impeller aerator of self-suction

An aerator that is installed at the bottom of a pool, the oxygen is filled to water body by means of automatic inhalation.

4 Assessment requirements

4.1 Basic requirements for qualitative assessment

4.1.1 The manufacturer of high efficiency rotary aerator shall meet relevant environmental protection laws, regulations and standards. The quality management system, environmental management system, occupational health and safety management system and energy management system shall be established, implemented and maintained.

4.1.2 The design, manufacture, installation and test methods, inspection rules of high efficiency rotary aerator shall comply with the provisions of JB/T 12579,

CJ/T 294, JB/T 8700 and GB/T 27872.

4.1.3 The motor used for high efficiency rotary aerator shall not be less than […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download GB/T 38220-2019

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 38220-2019

$75.00