Valid

JB/T 12193-2015Shaft sinking hoists (English PDF)

凿井提升机

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 12193-2015 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

April 30, 2015

Implementation date

October 1, 2015

Scope

JB/T 12193-2015 is the English-translated version of 凿井提升机.

JB/T 12193-2015 applies to shaft sinking hoists. The Chinese machinery industry standard fixes their types and basic parameters, the technical requirements, the test methods and the inspection rules, and the marking, packaging, transport and storage.

The hoists it covers raise and lower people, materials and equipment while a shaft is being sunk in coal, metal ore and non-metallic mineral mines. Its Chinese classification is D93 and its international classification 73.100.40.

The Ministry of Industry and Information Technology is the issuing agency. Among the standards it quotes are GB/T 8923.1-2011, GB/T 10095.1, GB/T 11345-2013, GB 16423, GB 20181 and JB/T 3812.

Found what you need?

Document preview — JB/T 12193-2015

National Standard of the People's Republic of China

ICS
73.100.40

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Model designation
  • 6 Test methods
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 8 Marking, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 Packaging

1 Foreword

JB/T 12193-2015 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 30 April 2015 and has been in force since 1 October 2015.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

JB/T 12193-2015 applies to shaft sinking hoists. The Chinese machinery industry standard fixes their types and basic parameters, the technical requirements, the test methods and the inspection rules, and the marking, packaging, transport and storage. The hoists it covers raise and lower people, materials and equipment while a shaft is being sunk in coal, metal ore and non-metallic mineral mines. Its Chinese classification is D93 and its international classification 73.100.40. The Ministry of Industry and Information Technology is the issuing agency. Among the standards it quotes are GB/T 8923.1-2011, GB/T 10095.1, GB/T 11345-2013, GB 16423, GB 20181 and JB/T 3812.

JB/T 12193-2015 falls under ICS 73.100.40, in the field of mining and minerals.

This catalogue holds 265 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

GB/T 191

GB/T 4879

GB/T 8923.1-2011 — Preparation of steel substrates before application of paints and related products -- Visual assessment of surface cleanliness -- Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previ

GB/T 10095.1

GB/T 10095.2

GB/T 11345-2013 — Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment

GB/T 13306

GB/T 13384

GB 16423

GB 20181

GB/T 25706

JB/T 1581

JB/T 3277

JB/T 3721

JB/T 3812

JB/T 8519

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Standards on related subjects:

JB/T 14329-2021 — Ring-roller micro powder mills

JB/T 9023.1-2019 — Down-the-hole drill rigs - Part 1: Open-pit mining type

MT/T 716-2019 — Technical delivery requirements of steel wire ropes for coal mine hoisting

JB/T 14596-2025 — Guide trough for mining belt conveyor

JB/T 14594-2025 — Underground mining blasting equipment transport vehicle

JB/T 12185-2015 — Aerial ropeways for underground mine - Friction lining

6 Classification and status

International classification (ICS): 73.100.40

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download JB/T 12193-2015

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 12193-2015

$169.00