Valid

JB/T 12091.2-2014Metal chip briquetting presses - Part 2: Technical requirements (English PDF)

金属屑压块机 第2部分:技术条件

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 12091.2-2014 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

July 9, 2014

Implementation date

November 1, 2014

Scope

JB/T 12091.2-2014 is the English-translated version of 金属屑压块机 第2部分:技术条件.

JB/T 12091.2-2014 is Part 2 of the Chinese machinery industry standard on metal chip briquetting presses and holds the technical requirements.

A recommended standard under classification J62 and ICS 25.120.10, it states the technical requirements for the press, the inspection and testing methods, the inspection rules, and the provisions on marking, packaging, transport and storage.

This part applies to hydraulic presses that compact metal scrap and swarf into briquettes. It is used with Part 1, JB/T 12091.1, and with the general metalforming machinery standard JB/T 1829, and it also cites GB/T 3766, GB/T 4879, GB 5226.1, GB 17120, GB/T 23281 and GB 26484. It was issued on 9 July 2014 and has applied since 1 November 2014.

Found what you need?

Document preview — JB/T 12091.2-2014

National Standard of the People's Republic of China

ICS
25.120.10

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.1 Electroplated Inner Cutting Disc
  • 3.2 Electroplated Needle File
  • 3.3 Electroplated Grinding Head
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Performance
  • 4.3 Safety and protection
  • 4.4 Castings, forgings and weldments
  • 4.5 Machining
  • 4.6 No-load operation requirements
  • 4.7 Load operation requirements
  • 4.8 Motion accuracy
  • 5 Test methods
  • 5.1 Appearance
  • 5.2 Protection requirements
  • 5.3 Machining and assembly quality of components
  • 5.4 Appearance quality
  • 5.5 Installation requirements for fire extinguishers
  • 5.6 Functional test requirements
  • 5.7 Anti-interference capability and functional stability test requirements
  • 5.8 Mass per unit area
  • 5.9 Tensile breaking force
  • 6 Inspection rules
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 6.3 Joint surfaces
  • 6.4 Numerical control system
  • 6.5 Working fluid system
  • 6.6 Lubrication system
  • 6.7 Machine running test
  • 6.8 Accuracy inspection
  • 6.9 Others
  • 7 Marking, packaging, transportation and storage
  • 7.2 Machining and assembly of components
  • 7.9 Load operation test
  • 8.1 General
  • 8.2 Inspection principles
  • 8.3 Inspection items
  • 8.4 Conformity judgment
  • 8.5 Storage
  • 9.1 Marking
  • 9.2 Packaging
  • 9.3 Transportation

1 Foreword

JB/T 12091.2-2014 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 9 July 2014 and has been in force since 1 November 2014.

It is one of 2 parts of the JB/T 12091 series.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard is Part 2 of the Chinese machinery industry standard on metal chip briquetting presses and holds the technical requirements. A recommended standard under classification J62 and ICS 25.120.10, it states the technical requirements for the press, the inspection and testing methods, the inspection rules, and the provisions on marking, packaging, transport and storage. This part applies to hydraulic presses that compact metal scrap and swarf into briquettes. It is used with Part 1, JB/T 12091.1, and with the general metalforming machinery standard JB/T 1829, and it also cites GB/T 3766, GB/T 4879, GB 5226.1, GB 17120, GB/T 23281 and GB 26484.

JB/T 12091.2-2014 falls under ICS 25.120.10, in the field of manufacturing engineering.

This catalogue holds 1,459 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

GB/T 191

GB/T 3766

GB/T 4879

GB 5226.1

GB/T 9969

GB/T 13306

GB/T 13384

GB 17120

GB/T 23281

GB 26484

JB/T 1829

JB/T 3240

JB/T 5775

JB/T 8609

JB/T 9954

JB/T 12091.1

4 Where this standard sits

It cites 16 standards, listed in full above.

It is one part of the JB/T 12091 series, of which this catalogue holds 2 parts.

5 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

6 Related standards

Other parts of this standard:

JB/T 12091.1-2014 — Part 1: Types and parameters

Standards on related subjects:

JB/T 13910.1-2020 — Stacking machines - Part 1: Types and basic parameters

GB/T 36229-2018 — Reliability assessment methods and indices for active opto-electronic protective devices

GB/T 35091-2018 — Straight-sided high-speed mechanical power presses -- Types and basic parameters

JB/T 12088.2-2014 — Pipe end forming machines - Part 2: Technical specifications

JB/T 12088.1-2014 — Pipe end forming machines - Part 1: Types and basic parameters

7 Classification and status

International classification (ICS): 25.120.10

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download JB/T 12091.2-2014

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 12091.2-2014

$135.00