JB/T 12072-2014Automatic cold heading machines for bimetal composite contacts (English PDF)
双金属复合触头自动冷焊机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 12072-2014 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
July 9, 2014
Implementation date
November 1, 2014
Scope
JB/T 12072-2014 is the English-translated version of 双金属复合触头自动冷焊机.
JB/T 12072-2014 is a recommended Chinese machinery industry standard covering automatic cold heading machines for bimetal composite contacts. It states the technical requirements for this equipment together with the inspection rules and the provisions for packaging, labelling and transport.
The machines concerned serve the cold heading process used to produce rivet-type bimetallic composite contacts, which places the standard in Chinese classification K14 and international classification 29.120.99.
GB/T 191, GB 2894 and GB 5226.1-2008 are quoted. Issued on 9 July 2014, it has applied since 1 November 2014.
Found what you need?
Document preview — JB/T 12072-2014
National Standard of the People's Republic of China
- ICS
- 29.120.99
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 12072-2014 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 9 July 2014 and has been in force since 1 November 2014.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard covering automatic cold heading machines for bimetal composite contacts. It states the technical requirements for this equipment together with the inspection rules and the provisions for packaging, labelling and transport. The machines concerned serve the cold heading process used to produce rivet-type bimetallic composite contacts, which places the standard in Chinese classification K14 and international classification 29.120.99. GB/T 191, GB 2894 and GB 5226.1-2008 are quoted.
JB/T 12072-2014 falls under ICS 29.120.99, in the field of electrical engineering.
This catalogue holds 619 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 191
GB 2894
GB 5226.1-2008 — Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
JB/T 8987-2017 — Technical requirements for silver-copper alloy wires (strips) for commutators
GB/T 3217-2013 — Permanent magnet (magnetically hard) materials -- Methods of measurement of magnetic properties
GB/T 24270-2009 — Method of measurement of temperature coefficient of magnetic properties of permanent magnetic materials
JB/T 12074-2014 — Quantitative Analysis of Composition Metal - Electron Probe Microanalysis
JB/T 12073-2014 — Specification for Silver-tungsten Carbide Electrical Contacts
JB/T 12071-2014 — High specific gravity alloy vibrator weights
6 Classification and status
International classification (ICS): 29.120.99
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download JB/T 12072-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
JB/T 12072-2014
$105.00