JB/T 11649-2013Separation System for Fly Ash (English PDF)
粉煤灰分选系统
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11649-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
October 17, 2013
Implementation date
March 1, 2014
Scope
JB/T 11649-2013 is the English-translated version of 粉煤灰分选系统.
JB/T 11649-2013 is a recommended Chinese machinery industry standard covering the sorting system for fly ash, referred to in the text simply as the sorting system.
It sets out terms and definitions, the classification of these systems, the technical requirements, the test methods, the inspection rules and the provisions for signs, instructions, packaging, transport and storage.
The document carries the Chinese classification J88 and the international classification 13.030.40, and was issued by the Ministry of Industry and Information Technology.
Among the standards it quotes are GB/T 985.1, GB/T 1596-2005, GB/T 6388, GB/T 8923.1-2011, GB/T 9286-1998, GB/T 9969, GB/T 26480, GB 50316 and JB/T 8470-2010.
Found what you need?
Document preview — JB/T 11649-2013
National Standard of the People's Republic of China
- ICS
- 13.030.40
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 11649-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 17 October 2013 and has been in force since 1 March 2014.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard covering the sorting system for fly ash, referred to in the text simply as the sorting system. It sets out terms and definitions, the classification of these systems, the technical requirements, the test methods, the inspection rules and the provisions for signs, instructions, packaging, transport and storage. The document carries the Chinese classification J88 and the international classification 13.030.40, and was issued by the Ministry of Industry and Information Technology. Among the standards it quotes are GB/T 985.1, GB/T 1596-2005, GB/T 6388, GB/T 8923.1-2011, GB/T 9286-1998, GB/T 9969, GB/T 26480, GB 50316 and JB/T 8470-2010.
JB/T 11649-2013 falls under ICS 13.030.40, in the field of environment and health protection, safety.
This catalogue holds 172 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 191
GB/T 985.1
GB/T 1596-2005 — Fly ash used for cement and concrete
GB/T 6388
GB/T 8923.1-2011 — Preparation of steel substrates before application of paints and related products -- Visual assessment of surface cleanliness -- Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previ
GB/T 9286-1998 — Paints and varnishes--Cross cut test for films
GB/T 9969
GB/T 13306
GB/T 26480
GB 50316
JB/T 8470-2010 — Positive pressure dense phase pneumatic fly ash conveying systems
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 38220-2019 — Technical requirements of assessment for high efficiency water pollutants control equipment—Rotary aerator
GB/T 35579-2017 — General specifications of gasoline vapor recovery unit
JB/T 8532-2008 — Pulse jet bag filters
JB/T 11643-2025 — Hazardous waste incineration tail gas treatment equipment
JB/T 11644-2014 — Safety Technical Specifications for Design, Debugging, Operation and Maintenance of Electrostatic-fabric Integrated Precipitator
JB/T 11639-2013 — High-frequency High-voltage Rectifier Equipment for Precipitator
6 Classification and status
International classification (ICS): 13.030.40
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 985.1Recommended joint preparation for gas welding, manual metal arc welding, gas-shield arc welding and beam welding
- GB/T 1596-2005Fly ash used for cement and concrete
- GB/T 6388Transport package shipping mark
- GB/T 8923.1-2011Preparation of steel substrates before application of paints and related products -- Visual assessment of surface cleanliness -- Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previ
- GB/T 9286-1998Paints and varnishes - Cross-cut test
Similar standards
How to Download JB/T 11649-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
JB/T 11649-2013
$135.00