GB/T 39201-2020Technical specifications for extraction of aluminium oxide from high-alumina fly ash (English PDF)
高铝粉煤灰提取氧化铝技术规范
This is a limited preview
Buy now to download the full PDF (17 pages)
Need quotation for your management?
Get a formal quotation for GB/T 39201-2020 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
October 11, 2020
Implementation date
May 1, 2021
Scope
GB/T 39201-2020 is the English-translated version of 高铝粉煤灰提取氧化铝技术规范.
GB/T 39201-2020 is the Chinese standard "Technical specifications for extraction of aluminium oxide from high-alumina fly ash".
Its scope clause reads: This standard specifies the technical principles, raw material requirements, technical requirements, product quality requirements, testing methods, by-products and waste recycling for extracting alumina from high-alumina fly ash.
This standard applies to the industrial design, process control and product quality control of the extraction of alumina by the pre-desilication soda lime sintering method.
Found what you need?
Document preview — GB/T 39201-2020
National Standard of the People's Republic of China
- ICS
- 13.030.99
- Classification
- Z 00
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope1
- 2 Normative references1
- 3 Terms and definitions2
- 4 Symbol3
- 5 Process flow3
- 6 Raw material requirements5
- 7 Technical requirements5
- 8 Detection method8
- 9 Product quality requirements8
- 10 By-products and waste recycling8
- Appendix A (Normative Appendix) Related Material Testing Methods9
- Appendix B (Normative Appendix) Methods for the detection of NT, Al2O3 and NK in solution12
- Appendix C (Normative Appendix) Detection of SiO2 in Solution15
- Appendix D (Normative Appendix) Determination of Effective CaO in Milk of Lime17
1 Scope
This standard specifies the technical principles, raw material requirements, technical requirements, product quality requirements, testing methods, by-products and waste recycling for extracting alumina from high-alumina fly ash.
This standard applies to the industrial design, process control and product quality control of the extraction of alumina by the pre-desilication soda lime sintering method.
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this document.
For undated references, the latest version (including all amendments) applies to this document.
GB/T 210.1 Industrial Sodium Carbonate and Its Test Method Part 1.Industrial Sodium Carbonate
GB/T 212-2008 Coal Industrial Analysis Method
GB/T 213-2008 Method for determination of calorific value of coal
GB/T 214-2007 Method for determination of total sulfur in coal
GB/T 260-2016 Determination of water content of petroleum products by distillation method
GB/T 264-1983 Determination of acid value of petroleum products
GB/T 265-1988 Petroleum products kinematic viscosity determination method and dynamic viscosity calculation method
GB/T 511-2010 Determination of mechanical impurities in petroleum and petroleum products and additives
GB/T 1574-2007 Analysis method of coal ash composition
GB/T 3286.1-2012 Chemical analysis methods for limestone and dolomite Part 1.Determination of calcium oxide and magnesium oxide content, complexometric titration and flame atomic absorption spectrometry
GB/T 3286.2-2012 Limestone and Dolomite Chemical Analysis Methods Part 2.Determination of Silica Content Silica Molybdenum Blue Spectrophotometric Method and Perchloric Acid Dehydration Gravimetric Method
GB/T 3536-2008 Determination of the flash point and ignition point of petroleum products Cleveland open cup method
GB/T 4294 Aluminum hydroxide
GB/T 4348.1-2013 Industrial sodium hydroxide-Determination of sodium hydroxide and sodium carbonate content
GB/T 4348.2-2014 Industrial sodium hydroxide-Determination of sodium chloride content-Mercury method
GB 5085.3 Identification Standard for Hazardous Wastes Identification of Extractive Toxicity
GB 5085.7 General Rules for Identification Standards of Hazardous Wastes
GB/T 6609.2-2009 Alumina chemical analysis method and physical property determination method Part 2.Determination of mass loss at 300°C and 1000°C
GB/T 6609.3-2004 Alumina chemical analysis methods and physical properties determination method molybdenum blue photometric determination of silica content
GB/T 6609.4-2004 Alumina chemical analysis method and physical property determination method phenanthroline spectrophotometric method for determination of iron oxide content
GB/T 6609.5-2004 Alumina chemical analysis method and physical property determination method Determination of sodium oxide content
GB 12348 Environmental Noise Emission Standard at the Boundary of Industrial Enterprises […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.
Similar standards
How to Download GB/T 39201-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 39201-2020
$300.00