JB/T 11529-2013Protective sleeves for air conditioner connecting pipes (English PDF)
空调连接管线用保护套管
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11529-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 25, 2013
Implementation date
September 1, 2013
Scope
JB/T 11529-2013 is the English-translated version of 空调连接管线用保护套管.
JB/T 11529-2013 is a recommended standard of the Chinese machinery industry dealing with the protective casing fitted over the connecting lines of air conditioners, called the protection tube in the text.
It lays down the terms and definitions for these sleeves, their classification, the requirements they have to meet, the test methods used to verify them, the inspection rules, and the provisions for marking, packaging and transport.
Among the standards it quotes are GB/T 1040.2-2006, GB/T 8806-2008, GB/T 9341, GB/T 10592 and GB/T 14522. It was issued by the Ministry of Industry and Information Technology and is filed under Chinese classification J73 and international classification 27.2.
Found what you need?
Document preview — JB/T 11529-2013
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 11529-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 25 April 2013 and has been in force since 1 September 2013.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is a recommended standard of the Chinese machinery industry dealing with the protective casing fitted over the connecting lines of air conditioners, called the protection tube in the text. It lays down the terms and definitions for these sleeves, their classification, the requirements they have to meet, the test methods used to verify them, the inspection rules, and the provisions for marking, packaging and transport. Among the standards it quotes are GB/T 1040.2-2006, GB/T 8806-2008, GB/T 9341, GB/T 10592 and GB/T 14522. It was issued by the Ministry of Industry and Information Technology and is filed under Chinese classification J73 and international classification 27.2.
JB/T 11529-2013 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,316 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 Normative references
GB/T 1040.2-2006 — Plastic - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastic
GB/T 8806-2008 — Plastics piping systems -- Plastics components -- Determination of dimensions
GB/T 9341
GB/T 10592
GB/T 14522
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
JB/T 12839-2016 — Integrated water chilling (heat pump) packages
GB/T 10870-2014 — The methods of performance test for water chilling (heat pump) packages using the vaper compression cycle
SB/T 10794.2-2012 — Commercial refrigerated cabinets - Part 2: Classification, requirements and test condition
JB/T 11520-2013 — Check Valve for Refrigeration Equipment
JB/T 11530-2013 — Closed Circuit Cooling Tower for Refrigeration
JB/T 11528-2013 — Seamless copper and copper alloy straight base tubes for finned tubes of refrigeration and heat exchangers
6 Classification and status
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 1040.2-2006Plastics – Determination of Tensile Properties – Part 2: Test Conditions for Moulding and Extrusion Plastics
- GB/T 8806-2008Plastics piping systems -- Plastics components -- Determination of dimensions
- GB/T 9341Plastics -- Determination of flexural properties
- GB/T 10592Specifications for high/low temperature testing chambers
- GB/T 14522Artificial weathering test method for plastics,coating and rubber materials used for machinery industrial products - Fluorescent UV lamps
Similar standards
How to Download JB/T 11529-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1040.2-2006 — Plastic - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastic
GB/T 10592-1989 — Specification for low/high temperature test chambers
GB/T 10592-2008 — Specification for low/high temperature test chambers
JB/T 11529-2013
$105.00