GB/T 46496-2025Kitchen air conditioner (English PDF)

1 Scope

This document specifies the general and performance technical requirements for kitchen air conditioners, describes the corresponding test methods, and clarifies the inspection rules and standards.

It covers aspects such as labeling, packaging, transportation, and storage, and also provides product classification and model naming for ease of technical specification.

This document applies to air-cooled and water-cooled condensers, fully enclosed motor-compressors, with a rated cooling capacity of 14000W and below.

Research, design, production and inspection of air conditioners used in household kitchen environments.

This document does not apply to the following products and systems.

---Portable air conditioner;

---Individual components cannot form a complete refrigeration system;

---Air conditioners that use absorption refrigeration cycles;

---Kitchen air conditioners installed in special locations, such as those where corrosive or explosive gases (dust, vapor, or methane) are present.

occasion.

The relevant testing procedures for the following products can be found in this document.

---Integrated products with kitchen air conditioning functions, and the testing of their kitchen air conditioning function;

---Testing of the function of independently turning on the kitchen air conditioning of the indoor unit of a multi-split air conditioning (heat pump) unit used in a household kitchen environment.

2 Normative references

The contents of the following documents, through normative references within the text, constitute essential provisions of this document. Dated citations are listed below.

For references to documents, only the version corresponding to that date applies to this document; for undated references, the latest version (including all amendments) applies.

This document.

GB/T 191 Packaging and Storage Graphic Symbols

GB/T 1040.2 Determination of tensile properties of plastics - Part 2.Test conditions for molded and extruded plastics

GB/T 1766 Rating Method for Aging of Paint and Varnish Coatings

GB/T 2423.3 Environmental testing - Part 2.Test methods - Test Cab. Constant damp heat test

GB/T 2423.17 Environmental testing - Part 2.Test methods - Test Ka. Salt spray

GB/T 2828.1 Sampling Procedures for Inspection by Attributes - Part 1.Sampling Schemes Retrieved by Acceptable Quality Limit (AQL) for Lot-by-Lot Inspection

GB/T 2829 Periodic inspection sampling procedures and tables (applicable to the inspection of process stability)

GB/T 4214.1 General requirements for noise testing methods of household and similar electrical appliances

GB 4343.1 Electromagnetic compatibility requirements for household appliances, power tools and similar appliances - Part 1.Emissions

GB/T 4706.1 Safety of household and similar electrical appliances - Part 1.General requirements

GB/T 4706.32 Safety of household and similar electrical appliances - Part 32.Particular requirements for heat pumps, air conditioners and dehumidifiers

GB/T 4798.1 Classification of Environmental Conditions - Classification of Environmental Parameter Groups and Grading of Severity - Part 1.Storage

GB/T 5296.2 Instructions for use of consumer products - Part 2.Household and similar electrical appliances

GB/T 7725-2022 Room Air Conditioners

GB/T 9286 Paints and varnishes - Cross-cut test

GB/T 10125 Corrosion test under artificial atmosphere - Salt spray test

GB/T 14522 Artificial Weathering Test Method for Plastics, Coatings and Rubber Materials Used in Machinery Industry - Fluorescent Ultraviolet Lamp

GB/T 21551.6 | GB/T 39761.1 | GB/T 23333 | GB/T 17790 | GB/T 46502 | […]