Valid

JB/T 11497-2013Electronic digital three-point internal micrometers (English PDF)

电子数显三点内径尺

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 11497-2013 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

December 31, 2013

Implementation date

July 1, 2014

Scope

JB/T 11497-2013 is the English-translated version of 电子数显三点内径尺.

JB/T 11497-2013 is a recommended Chinese machinery industry standard for three-point internal diameter gauges that carry an electronic digital display. It fixes the terms and definitions used for these instruments, their types and basic parameters, the requirements they must satisfy, the test methods, and the rules for marking and packaging.

Its field of application is set out for gauges with a resolution of 0.001 mm. Among the standards it quotes are GB/T 2423.3-2006, GB/T 2423.22-2012, GB 4208-2008, GB/T 17163-2008, GB/T 17626.2-2006 and GB/T 17626.3-2006.

The document belongs to Chinese classification J42 and international classification 17.040.30, and was issued by the Ministry of Industry and Information Technology.

Found what you need?

Document preview — JB/T 11497-2013

National Standard of the People's Republic of China

ICS
17.040.30

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Model designation
  • 6 Test methods
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 8 Marking, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 Packaging

1 Foreword

JB/T 11497-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 31 December 2013 and has been in force since 1 July 2014.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

This standard is a recommended Chinese machinery industry standard for three-point internal diameter gauges that carry an electronic digital display. It fixes the terms and definitions used for these instruments, their types and basic parameters, the requirements they must satisfy, the test methods, and the rules for marking and packaging. Its field of application is set out for gauges with a resolution of 0.001 mm. Among the standards it quotes are GB/T 2423.3-2006, GB/T 2423.22-2012, GB 4208-2008, GB/T 17163-2008, GB/T 17626.2-2006 and GB/T 17626.3-2006. The document belongs to Chinese classification J42 and international classification 17.040.30, and was issued by the Ministry of Industry and Information Technology.

JB/T 11497-2013 falls under ICS 17.040.30, in the field of metrology and measurement.

This catalogue holds 163 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

GB/T 2423.3-2006 — Environmental testing for electric and electronic products - Part 2: Testing method - Test Cab: Damp heat, steady state

GB/T 2423.22-2012 — Environmental testing - Part 2: Test methods - Test N: Change of temperature

GB 4208-2008 — Degrees of Protection Provided By Enclosure (IP Code)

GB/T 17163-2008 — Glossary of terms used in dimensional measuring instruments - General terms

GB/T 17626.2-2006 — Electromagnetic compatibility (EMC) - Testing and measurement techniques - Electrostatic discharge immunity test

GB/T 17626.3-2006 — Electromagnetic compatibility - Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Standards on related subjects:

GB/T 10932-2024 — Screw thread micrometer

GB/T 1218-2018 — Depth micrometer

GB/T 1957-2006 — Tolerances and general features for plain limit gauges

JB/T 11507-2025 — Vernier,dial and digital calipers with long jaws

JB/T 11499-2013 — Capacitance Angular Displacement Measuring System

JB/T 11498-2013 — Grating Rotary Encoder

6 Classification and status

International classification (ICS): 17.040.30

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download JB/T 11497-2013

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 11497-2013

$209.00