Valid

JB/T 11345-2013EPS block moulding machines (English PDF)

可发性聚苯乙烯泡沫塑料 板材成型机

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 11345-2013 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

December 31, 2013

Implementation date

July 1, 2014

Scope

JB/T 11345-2013 is the English-translated version of 可发性聚苯乙烯泡沫塑料 板材成型机.

JB/T 11345-2013 is a recommended standard of the Chinese machinery industry for the moulding machine that shapes expandable polystyrene foam into board.

It defines the terms used, sets the models and the basic parameters of the machine, states the requirements, and gives the test methods and the inspection rules, before going on to marking, packaging, transport and storage.

Among the standards it quotes are GB/T 3766-2001, GB 5226.1-2008, GB/T 7932-2003, GB/T 12467.4-2009, GB/T 17421.1-1998, HG/T 3228 and JB/T 4127.1-2013. The Chinese classification is G95, and two international classifications are recorded, 71.120 and 83.200.

Found what you need?

Document preview — JB/T 11345-2013

National Standard of the People's Republic of China

ICS
71.120; 83.200

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Model designation
  • 6 Test methods
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 8 Marking, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 Packaging

1 Foreword

JB/T 11345-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 31 December 2013 and has been in force since 1 July 2014.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

This standard is a recommended standard of the Chinese machinery industry for the moulding machine that shapes expandable polystyrene foam into board. It defines the terms used, sets the models and the basic parameters of the machine, states the requirements, and gives the test methods and the inspection rules, before going on to marking, packaging, transport and storage. Among the standards it quotes are GB/T 3766-2001, GB 5226.1-2008, GB/T 7932-2003, GB/T 12467.4-2009, GB/T 17421.1-1998, HG/T 3228 and JB/T 4127.1-2013. The Chinese classification is G95, and two international classifications are recorded, 71.120 and 83.200.

JB/T 11345-2013 falls under ICS 71.120; 83.200, in the field of chemical technology.

This catalogue holds 70 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

GB/T 191

GB/T 3766-2001 — Hydraulic fluid power - General rules relating to systems

GB 5226.1-2008 — Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements

GB/T 6388

GB/T 6576-2002 — Machine tool -- Lubrication systems

GB/T 7932-2003 — Pneumatic fluid power - General rules relating to systems

GB/T 12467.4-2009 — Quality requirements for fusion welding of metallic materials -- Part 4: Elementary quality requirements

GB/T 12783

GB/T 13306

GB/T 13384

GB/T 14211

GB/T 17421.1-1998 — Test code for machine tools. Part 1: Geometric accuracy of machines operating under no-load or finishing conditions

GB 23821-2009

HG/T 3228

JB/T 4127.1-2013 — Mechanical Seal - Part 1: Specification

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Standards on related subjects:

GB/T 25156-2020 — General specifications and inspection methods of rubber and plastics injection moulding machines

JB/T 8539-2013 — Plastic Extrusion Blow Molding Machines

GB 20055-2006 — Safety requirements of mill for rubber and plastics

JB/T 11346-2013 — EPS Sheet Cutting Machine

JB/T 11344-2013 — PVC compounding systems

JB/T 11343-2013 — Conical Co-rotating Twin-screw Plastics Extruder

6 Classification and status

International classification (ICS): 71.120; 83.200

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download JB/T 11345-2013

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 11345-2013

$105.00