Valid

JB/T 9396-2013Ring-block Wear Testing Machines - Technical Specification (English PDF)

环块磨损试验机 技术规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 9396-2013 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

April 25, 2013

Implementation date

September 1, 2013

Scope

JB/T 9396-2013 is the English-translated version of 环块磨损试验机 技术规范.

JB/T 9396-2013 is a recommended standard of the Chinese machinery industry for ring-block wear testing machines. It sets the technical requirements for the machine, the test methods, the inspection rules, the marking and packaging and the documents that accompany the machine.

The machines it addresses are those used to determine load-carrying capacity in accordance with GB/T 11144. It quotes GB/T 2611-2007, GB/T 11144-2007, GB/T 12444 and JB/T 6147-2007, and it replaces JB/T 9396-1999.

It was issued by the Ministry of Industry and Information Technology, and its Chinese classification is N75 and its international classification 19.060.

Found what you need?

Document preview — JB/T 9396-2013

National Standard of the People's Republic of China

ICS
19.060
Replacing
JB/T 9396-1999

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Model designation
  • 6 Test methods
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 8 Marking, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 Packaging

1 Foreword

JB/T 9396-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 25 April 2013 and has been in force since 1 September 2013.

It replaces the earlier edition JB/T 9396-1999.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard is a recommended standard of the Chinese machinery industry for ring-block wear testing machines. It sets the technical requirements for the machine, the test methods, the inspection rules, the marking and packaging and the documents that accompany the machine. The machines it addresses are those used to determine load-carrying capacity in accordance with GB/T 11144. It quotes GB/T 2611-2007, GB/T 11144-2007, GB/T 12444 and JB/T 6147-2007, and it replaces JB/T 9396-1999. It was issued by the Ministry of Industry and Information Technology, and its Chinese classification is N75 and its international classification 19.060.

JB/T 9396-2013 falls under ICS 19.060, in the field of testing.

This catalogue holds 110 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

GB/T 2611-2007 — General requirements for testing machines

GB/T 11144-2007 — Standard test method for measurement of extreme-pressure properties of lubricating fluids (Timken method)

GB/T 12444

JB/T 6147-2007 — Technical requirements for packaging, package marking, storage and transport of testing machines

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Other editions:

JB/T 9396-1999 (earlier edition)

Standards on related subjects:

GB/T 39849-2021 — Non-destructive testing instruments—Ultrasonic time-of-flight diffraction instrument—Methods of performance tests

GB/T 12160-2019 — Metallic materials - Calibration of extensometers systems used in uniaxial testing

JB/T 8290-2011 — Non-destructive testing instruments - Magnetic particle flaw detectors

JB/T 7407-2025 — Packaging case drop testing machines - Technical specification

JB/T 7796-2017 — Tension and compression spring testing machines

JB/T 9395-2017 — Four-ball friction testing machines

6 Classification and status

International classification (ICS): 19.060

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of JB/T 9396

EditionTitleRevisionStatus
JB/T 9396-2013Ring-block Wear Testing Machines - Technical Specificationcurrent editionCurrent
JB/T 9396-1999Ring-block Wear Testing Machines - Technical Specificationprevious editionSuperseded

This page sells the current edition, JB/T 9396-2013. Earlier editions are listed for reference only.

How to Download JB/T 9396-2013

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 9396-2013

$195.00