JB/T 11308-2013Overrunning Clutches for Wheel Loader - Technical Specification (English PDF)
轮胎式装载机用超越离合器 技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11308-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 25, 2013
Implementation date
September 1, 2013
Scope
JB/T 11308-2013 is the English-translated version of 轮胎式装载机用超越离合器 技术条件.
JB/T 11308-2013 is the Chinese machinery industry standard for the overrunning clutch fitted to wheel loaders. It sets out the classification of the clutch, the requirements it must meet, the test methods, the inspection rules and the provisions for marking, packaging, transport and storage.
The machines it is written for are tyred loaders with a rated load of 4 t or 5 t. Among the standards it quotes are GB/T 230.1, GB/T 2829, GB/T 3478.1, GB/T 10095.1, GB/T 10095.2, GB/T 13924, GB/T 15822.1, GB/T 21153, JB/T 5942, JB/T 5944, JB/T 5947 and JB/T 6031. Its Chinese classification is P97 and its international classification 53.100.
Found what you need?
Document preview — JB/T 11308-2013
National Standard of the People's Republic of China
- ICS
- 53.100
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and definitions
- 4 Classifications and Groups
- 4.1 Types
- 5 Technical requirements
- 7 Test Methods
- 8 Inspection Rules
- 9 Marking, Packaging, Transportation and Storage
1 Foreword
JB/T 11308-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 25 April 2013 and has been in force since 1 September 2013.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the Chinese machinery industry standard for the overrunning clutch fitted to wheel loaders. It sets out the classification of the clutch, the requirements it must meet, the test methods, the inspection rules and the provisions for marking, packaging, transport and storage. The machines it is written for are tyred loaders with a rated load of 4 t or 5 t. Among the standards it quotes are GB/T 230.1, GB/T 2829, GB/T 3478.1, GB/T 10095.1, GB/T 10095.2, GB/T 13924, GB/T 15822.1, GB/T 21153, JB/T 5942, JB/T 5944, JB/T 5947 and JB/T 6031. Its Chinese classification is P97 and its international classification 53.100.
JB/T 11308-2013 falls under ICS 53.100, in the field of materials handling equipment.
This catalogue holds 232 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 230.1
GB/T 2829
GB/T 3478.1
GB/T 3478.2
GB/T 3478.3
GB/T 3478.4
GB/T 3478.5
GB/T 3478.6
GB/T 3478.7
GB/T 3478.8
GB/T 3478.9
GB/T 10095.1
GB/T 10095.2
GB/T 13924
GB/T 15822.1
GB/T 21153
JB/T 5942
JB/T 5944
JB/T 5947
JB/T 6031
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 8419-2023 — Earth-moving machinery - Laboratory evaluation of operator seat vibration
JB/T 8816-1998 — Construction machinery - Drive axles - Technical specifications
GB/T 13752-1992 — Design rules for tower cranes
JB/T 11304-2013 — Hydraulic excavators - Pins of working equipment
JB/T 11303-2013 — Multiple Control Block for Hydraulic Excavators - Technical Specifications
JB/T 11302-2013 — Hydraulic breakers - Chisels
6 Classification and status
International classification (ICS): 53.100
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 230.1Metallic materials - Rockwell hardness test - Part 1: Test method
- GB/T 2829Sampling procedures and tables for periodic inspection by attributes
- GB/T 3478.1Straight cylindrical involute splines -- Metric module, side fit -- Part 1: Generalities
- GB/T 3478.2Straight cylindrical involute splines -- Metric module, side fit -- Part 2: 30-degreepressure angle dimensions tables
- GB/T 3478.3Straight cylindrical involute splines - Metric module, side fit - Part 3: 37.5°pressure angle dimensions tables
- GB/T 3478.4Straight cylindrical involute splines - Metric module, side fit - Part 4: 45°pressure angle dimensions tables
Similar standards
How to Download JB/T 11308-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10095.1-2001 — Cylindrical gears - System of accuracy - Part 1: Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth
GB/T 10095.1-2008 — Cylindrical gears - System of accuracy - Part 1: Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth
GB/T 10095.1-2022 — Cylindrical gears - ISO system of flank tolerance classification - Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth
JB/T 11308-2013
$105.00