JB/T 11257-2011General acceptance rules for meteorological instruments (English PDF)
气象仪器通用验收规则
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11257-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 20, 2011
Implementation date
April 1, 2012
Scope
JB/T 11257-2011 is the English-translated version of 气象仪器通用验收规则.
JB/T 11257-2011 is a recommended Chinese machinery industry standard that lays down general acceptance rules for meteorological instruments. It states the acceptance rules themselves, and those rules are written to be used when meteorological instruments and meteorological equipment are taken into acceptance.
The Ministry of Industry and Information Technology issued the document, and the catalogue records it under the Chinese classification N95 and the international classification 07.060.
Among the standards it quotes are GB/T 2423.1-2008, GB/T 2423.5-1995, GB/T 2423.10-2008, GB/T 2828.1-2003, GB 4793.1-2007, GB/T 6587.6-1986, GB/T 17626.6-2008, GJB 6556.6-2008 and QX/T 8-2002.
Found what you need?
Document preview — JB/T 11257-2011
National Standard of the People's Republic of China
- ICS
- 07.060
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 1 Scope
- 2 Normative references
1 Foreword
JB/T 11257-2011 was issued by MIIT on 20 December 2011 and has been in force since 1 April 2012.
2 Scope
This standard is a recommended Chinese machinery industry standard that lays down general acceptance rules for meteorological instruments. It states the acceptance rules themselves, and those rules are written to be used when meteorological instruments and meteorological equipment are taken into acceptance. The Ministry of Industry and Information Technology issued the document, and the catalogue records it under the Chinese classification N95 and the international classification 07.060. Among the standards it quotes are GB/T 2423.1-2008, GB/T 2423.5-1995, GB/T 2423.10-2008, GB/T 2828.1-2003, GB 4793.1-2007, GB/T 6587.6-1986, GB/T 17626.6-2008, GJB 6556.6-2008 and QX/T 8-2002.
3 Normative references
JB/T 11257-2011 cites a number of standards, which apply in full or in part through the references made to them in its clauses. Those listed below are the ones the catalogue record shows; the record cuts the list short, so it may not be complete.
GB/T 191-2008
GB/T 2423.1-2008 — Environmental testing for electric and electronic products - Part 2: Test methods - Tests A: Cold
GB/T 2423.2-2008 — Environmental testing for electric and electronic products - Part 2: Test methods - Tests B: Dry heat
GB/T 2423.3-2006
GB/T 2423.4-2008 — Environmental testing for electric and electronic products - Part 2: Test method - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
GB/T 2423.5-1995
GB/T 2423.10-2008
GB/T 2423.21-2008
GB/T 2828.1-2003
GB/T 2829-2002
GB 4793.1-2007 — Safety requirements for electrical equipment for measurement,control,andlaboratory use-Part 1:General requirements
GB/T 6587.6-1986
GB/T 6587.8-1986
GB 11463-1989
GB/T 13384-2008 — General specifications for packing of mechanical and electrical product
GB/T 17626.4-2008
GB/T 17626.6-2008
GB/T 17626.14-2005 — Electromagnetic compatibility -- Testing and measurement techniques -- Voltage fluctuation immunity test
GJB 6556.6-2008
JJF 1001-1998
QX/T 8-2002
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Classification and status
International classification (ICS): 07.060
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191-2008Graphical symbols marking for handling and storage of packages
- GB/T 2423.1-2008Environmental testing for electric and electronic products - Part 2: Test methods - Tests A: Cold
- GB/T 2423.2-2008Environmental testing for electric and electronic products - Part 2: Test methods - Tests B: Dry heat
- GB/T 2423.3-2006Environmental testing - Part 2: Testing method - Test Cab: Damp heat, steady state
- GB/T 2423.4-2008Environmental testing for electric and electronic products - Part 2: Test method - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
- GB/T 2423.5-1995Environmental testing - Part 2: Test methods - Test Ea and guidance: Shock
GB/T 6587.6-1986 · GB/T 6587.8-1986 · GB 11463-1989 · GJB 6556.6-2008 · QX/T 8-2002
Similar standards
How to Download JB/T 11257-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 4793.1-2007 — Safety requirements for electrical equipment for measurement,control,andlaboratory use-Part 1:General requirements
GB/T 13384-2008 — General specifications for packing of mechanical and electrical product
GB/T 17626.14-2005 — Electromagnetic compatibility -- Testing and measurement techniques -- Voltage fluctuation immunity test
Secure payment via Stripe
Payments accepted
JB/T 11257-2011
$135.00