Valid

JB/T 11205-2011DC leakage current sensors (English PDF)

直流漏电流传感器

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 11205-2011 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

August 15, 2011

Implementation date

November 1, 2011

Scope

JB/T 11205-2011 is the English-translated version of 直流漏电流传感器.

JB/T 11205-2011 is a recommended Chinese machinery industry standard for DC leakage current sensors of the through-hole type. It gives the terms and definitions, the product classification, the requirements, the test methods, the inspection rules and the provisions on marking, packaging, transport and storage.

The sensors it covers are those that pick up the direct leakage current flowing between the positive and the negative feeder of a DC supply and deliver an output which, within the measuring range, is a function of the input current.

The standard applies to sensors for leakage currents of 1000 mA and below. Its Chinese classification code is N20 and its international classification is 17.220.20.

Among the standards it quotes are GB/T 2829-2002, GB/T 7665-2005 and JB/T 9329-1999.

Found what you need?

Document preview — JB/T 11205-2011

National Standard of the People's Republic of China

ICS
17.220.20

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Model designation
  • 6 Test methods
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 8 Marking, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 Packaging

1 Foreword

JB/T 11205-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 15 August 2011 and has been in force since 1 November 2011.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

This standard is a recommended Chinese machinery industry standard for DC leakage current sensors of the through-hole type. It gives the terms and definitions, the product classification, the requirements, the test methods, the inspection rules and the provisions on marking, packaging, transport and storage. The sensors it covers are those that pick up the direct leakage current flowing between the positive and the negative feeder of a DC supply and deliver an output which, within the measuring range, is a function of the input current. The standard applies to sensors for leakage currents of 1000 mA and below. Its Chinese classification code is N20 and its international classification is 17.220.20. Among the standards it quotes are GB/T 2829-2002, GB/T 7665-2005 and JB/T 9329-1999.

JB/T 11205-2011 falls under ICS 17.220.20, in the field of metrology and measurement.

This catalogue holds 163 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

GB/T 2829-2002 — Sampling procedures and tables for periodic inspection by attributes (apply to inspection of process stability)

GB/T 7665-2005 — General terminology for transducers

GB/T 13384-2008 — General specifications for packing of mechanical and electrical product

JB/T 9329-1999 — Instruments - Basic environmental conditions and test methods for transportation and storage

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Standards on related subjects:

GB 4793-2024 — Safety technical specification for electrical equipment for measurement,control and laboratory use

GB/T 15284-2022 — Multi-rate electricity meters - Particular requirements

GB/T 18216.8-2015 — Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. -- Equipment for testing, measuring or monitoring of protective measures -- Part 8: Insulation monitoring devices for IT systems

JB/T 13271-2017 — Electrical isolation sensors

JB/T 12236-2015 — Digital electrical quantity transducers

6 Classification and status

International classification (ICS): 17.220.20

Chinese Standard Classification (CCS): N 20

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download JB/T 11205-2011

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 11205-2011

$255.00