GB/T 32191-2015Leakage current tester (English PDF)
泄漏电流测试仪
This is a limited preview
Buy now to download the full PDF (20 pages)
Need quotation for your management?
Get a formal quotation for GB/T 32191-2015 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 10, 2015
Implementation date
July 1, 2016
Scope
GB/T 32191-2015 is the English-translated version of 泄漏电流测试仪.
GB/T 32191-2015 is the Chinese standard "Leakage current tester". Its scope clause reads: This standard specifies the leakage current tester of terms and definitions, classification, requirements, test methods, inspection rules and signs, packaging, transportation And storage.
This standard applies to AC leakage current tester (hereinafter referred to as "testers") and leakage current measuring safety performance integrated test apparatus Test section.
Found what you need?
Document preview — GB/T 32191-2015
National Standard of the People's Republic of China
- ICS
- 17.220.20
- Classification
- N 20
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Product Category
- 5 Requirement
- 6 Test methods
- 7 Inspection rules
- 8 signs, packaging, transportation and storage
- Appendix A (normative) body impedance network
- Appendix B (normative) pilot projects and recommended test sequence
1 Scope
This standard specifies the leakage current tester of terms and definitions, classification, requirements, test methods, inspection rules and signs, packaging, transportation
And storage.
This standard applies to AC leakage current tester (hereinafter referred to as "testers") and leakage current measuring safety performance integrated test apparatus
Test section.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 191-2008 Packaging - Pictorial signs (ISO 780.1997, MOD)
GB/T 2423.1-2008 Environmental testing for electric and electronic products Part 2. Test methods Test A. Cold (IEC 60068-2-
1.2007, IDT)
GB/T 2423.2-2008 Environmental testing for electric and electronic products Part 2. Test methods Test B. Dry heat (IEC 60068-2-
2.2007, IDT)
GB/T 2423.4-2008 Environmental testing for electric and electronic products Part 2. Test methods - Test Db. Damp heat (12h
12h cycle) (IEC 60068-2-30.2005, IDT)
GB/T 2423.10-2008 Environmental testing for electric and electronic products Part 2. Test methods Test Fc. Vibration (sinusoidal) (IEC 60068-2-6.1995, IDT)
GB/T 2829-2002 periodic inspection Sampling procedures and tables (suitable for process stability test)
GB 4793.1-2007 measurement, control and laboratory safety requirements for electrical equipment Part 1. General requirements (IEC 61010-
1.2001, IDT)
GB/T 5169.10-2006 Fire hazard testing for electric and electronic products - Part 10. Glowing/hot wire based test methods for burning
Hot wire apparatus and common test procedure (IEC 60695-2-10.2000, IDT)
GB/T 6592-2010 Electrical and electronic measurement equipment - Expression of performance (IEC 60359.2001, IDT)
GB radio disturbance characteristics - Limits and methods of measurement 9254-2008 information technology equipment (CISPR22.2006, IDT)
GB/T 12113-2003 touch current and protective conductor current measurement method (IEC 60990.1999, IDT)
GB/T 17626.2-2006 Electromagnetic compatibility - Testing and measurement techniques - Electrostatic discharge immunity test (IEC 61000-4-2.2001,
IDT)
GB/T 17626.3-2006 Electromagnetic compatibility - Testing and measurement techniques RFEMS test (IEC 61000-4-
3.2002, IDT)
GB/T 17626.11-2008 Electromagnetic compatibility Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity
Test (IEC 61000-4-11.2004, IDT)
IEC 60050-151.2001 International Electrotechnical Vocabulary (IEV) electric and magnetic devices (InternationalElectrotechnicalVocabu- lary.Part 151. Electricalandmagneticdevices)
IEC 60050-195.1998 International Electrotechnical Vocabulary (IEV) to prevent electric shock grounding and protection (InternationalElectrotechnical
Vocabulary-Part 195. Earthingandprotectionagainstelectricshock) […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.
Similar standards
How to Download GB/T 32191-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 32191-2015
$355.00