JB/T 11010-2010Crawler dozer - Nuts for track shoe and sprocket segment (English PDF)
履带式推土机 履带和齿块用螺母
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11010-2010 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
February 11, 2010
Implementation date
July 1, 2010
Scope
JB/T 11010-2010 is the English-translated version of 履带式推土机 履带和齿块用螺母.
JB/T 11010-2010 is the Chinese standard "Crawler dozer - Nuts for track shoe and sprocket segment". Its scope clause reads: This standard specifies the type and size, requirements, test methods, inspection rules, marking, packaging and storage of nuts for track shoe and sprocket segment of crawler dozer (hereinafter referred to as “nuts”).
This standard is applicable to nuts for track shoe and sprocket segment of crawler dozer, bulldozer, loader and pipelayer. Its clauses include type and size.
Found what you need?
Document preview — JB/T 11010-2010
National Standard of the People's Republic of China
- ICS
- 53.100
- Replacing
- JB/T 2984.3-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword i
- 1 Scope
- 2 Normative references
- 3 Type and size
- 4 Requirements
- 5 Test methods
- 5.1 Proof load test
- 5.2 Hardness test
- 6 Inspection rules
- 7 Marking, packaging and storage
- 7.1 Marking
- 7.2 Packaging
- 7.3 Storage
- 7.4 Accompanying documents
1 Scope
This standard specifies the type and size, requirements, test methods, inspection rules, marking, packaging and storage of nuts for track shoe and sprocket segment of crawler dozer (hereinafter referred to as “nuts”).
This standard is applicable to nuts for track shoe and sprocket segment of crawler dozer, bulldozer, loader and pipelayer.
2 Normative references
The following documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections), or revisions, of any of these publications do not apply to this standard. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document applies.
GB/T 90.1 Fasteners - Acceptance inspection (GB/T 90.1-2002, idt ISO 3269: 2000)
GB/T 193-2003 General purpose metric screw threads - General plan (ISO 261: 1998, MOD)
GB/T 197-2003 General purpose metric screw threads - Tolerances (ISO 965-1: 1998, MOD)
GB/T 3098.4-2000 Mechanical properties of fasteners - Nuts - Fine pitch thread (idt ISO 898-6: 1994)
JB/T 5947 Construction machinery - General specifications for packing
3 Type and size
3.1
The type and size of nuts shall be in accordance with those specified in Figure 1 and Table 1.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 90.1Fasteners - Acceptance inspection
- GB/T 193-2003General purpose metric screw threads -- General plan
- GB/T 197-2003General purpose metric screw threads -- Tolerances
- GB/T 3098.4-2000Mechanical properties of fasteners. Nuts. Fine pitch thread
- JB/T 5947Construction machinery - General specifications for packing
Similar standards
Editions of JB/T 11010
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 11010-2010 | Crawler dozer - Nuts for track shoe and sprocket segment | current edition | Current |
| JB/T 2984.3-1999 | Crawler dozer - Nuts for track shoe and sprocket segment | previous edition | Superseded |
This page sells the current edition, JB/T 11010-2010. Earlier editions are listed for reference only.
How to Download JB/T 11010-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 193-2003 — General purpose metric screw threads -- General plan
GB/T 197-2003 — General purpose metric screw threads – Tolerances
GB/T 3098.4-2000 — Mechanical properties of fasteners. Nuts. Fine pitch thread
Secure payment via Stripe
Payments accepted
JB/T 11010-2010
$55.00