GB/T 35202-2017Earth-moving machinery—Crawler tractor-dozer—Test methods (English PDF)
土方机械 履带式推土机 试验方法
This is a limited preview
Buy now to download the full PDF (20 pages)
Need quotation for your management?
Get a formal quotation for GB/T 35202-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 29, 2017
Implementation date
July 1, 2018
Scope
GB/T 35202-2017 is the English-translated version of 土方机械 履带式推土机 试验方法.
GB/T 35202-2017 is the Chinese standard "Earth-moving machinery—Crawler tractor-dozer—Test methods". Its scope clause reads: This standard specifies the terms and definitions crawler tractors, test conditions and test methods.
This standard applies to the engine net power of 60kW ~ 400kW mechanical transmission, hydraulic mechanical transmission and hydrostatic transmission Crawler Dozer (hereinafter referred to as bulldozer).
Bulldozer derivatives (such as push rake), variant products, and net power greater than 400kW Bulldozers can also refer to the use.
Found what you need?
Document preview — GB/T 35202-2017
National Standard of the People's Republic of China
- ICS
- 53.100
- Classification
- P 97
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 test conditions
- 5 set the test
- 6 empty run test
- 7 blade performance test
- 8 driving performance test
- 12 heat balance test
- 13 waterproof seal test
- 14 noise test
- 15 Driver seat vibration test
- 17 Electrical Equipment and Electrical System Test
- 18 Test of lighting, signal and sign lights and reflectors
- 19 Tests for progressing and reversing audible alarm sounds
- 20 Surveillance and mirror test
- 21 Driver Protection Device Test
- 23 Reliability Test
1 Scope
This standard specifies the terms and definitions crawler tractors, test conditions and test methods.
This standard applies to the engine net power of 60kW ~ 400kW mechanical transmission, hydraulic mechanical transmission and hydrostatic transmission
Crawler Dozer (hereinafter referred to as bulldozer). Bulldozer derivatives (such as push rake), variant products, and net power greater than 400kW
Bulldozers can also refer to the use.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB 5226.1 Safety of machinery - Electrical machinery and electrical equipment - Part 1. General specifications
GB 5226.6 Safety of machinery and electrical machinery and electrical equipment Part 6. Construction machinery and technical conditions
Earth-moving machinery GB/T 6375 traction testing methods
GB/T 8419 Earth-moving machinery driver's seat vibration laboratory evaluation
GB/T 8498 earthmoving machinery basic type identification, terms and definitions
GB/T 8499 earth moving machinery to determine the location of the center of gravity method
GB/T 8590 bulldozer terminology
GB/T 8595 earth-moving machinery driver's operating device
Earth-moving machinery GB/T 10913 Determination of speed
Earthwork machinery driver field test methods and performance criteria
GB/T 17771 earth machinery fall protection structure laboratory tests and performance requirements
GB/T 17922 Earth-moving machinery rollover protection laboratory test and performance requirements
GB/T 18826 Industrial 1,1,1,2-tetrafluoroethane (HFC-134a)
GB 19517 National Electrical Equipment Safety Technical Laboratory test
Earth - moving machinery cab environment - Part 2. Air filter test methods
GB/T 19933.3 Earth-moving machinery cab environment - Part 3. Turbocharger test method
GB/T 19933.4 Earth-moving machinery cab environment Part 4 - Test methods for heating, ventilation and air conditioning (HVAC) and performance
GB/T 19933.5 Earth-moving machinery cab environment - Part 5. Test method of the windshield defrosting system
GB/T 19933.6 Earth-moving machinery cab environment - Part 6. Determination of solar thermal effects
GB/T 20082 hydraulic transmission fluid pollution using optical microscopy method of particle contamination
GB/T 20418 earth moving machinery lighting, signal and sign lights and reflectors
GB 20891 Non-road mobile machinery exhaust emission limits and measurement methods of diesel engines (China's third and fourth phase)
GB/T 21153 earthmoving machinery dimensions, performance and parameters of the unit and measurement accuracy
GB/T 21154 earth moving machinery machine and its work equipment and components of the quality measurement methods
Earth - moving machinery - Acoustical alarm of forward and reverse audible test methods GB/T 21155
GB/T 25612 earth machinery - Determination of sound power level set the test conditions
Earth-moving machinery - Determination of emission sound pressure level at the driver's location - Set test conditions […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 35202-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 35202-2017
$360.00