JB/T 11009-2010Crawler dozer - Bolts for drive sprocket segment (English PDF)

1 Foreword

JB/T 11009-2010 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 11 February 2010 and has been in force since 1 July 2010.

2 Scope

JB/T 11009-2010 covers the bolts used with the drive sprocket segments of crawler dozers, and is a recommended standard of the Chinese machinery industry. It fixes their form and dimensions and goes on to the requirements, the test methods, the inspection rules, the marking methods and the marking itself, the packaging and the storage. The standard applies to the drive sprocket segment bolts of crawler dozers, push rakes, loaders and pipelayers. It supersedes JB/T 2984.2-1999. Its Chinese classification is P97 and its international classification 53.100. Among the standards it quotes are GB/T 197-2003, GB/T 3098.1-2000 and JB/T 5947.

3 Normative references

JB/T 11009-2010 cites the following standards, which apply in full or in part through the references made to them in its clauses.

GB/T 90.1

GB/T 193

GB/T 197-2003

GB/T 3077-1999

GB/T 3098.1-2000

JB/T 5947

4 Where this standard sits

JB/T 11009-2010 is classified under ICS 53.100, in the field of materials handling equipment.

It cites 6 standards, listed in full above.

5 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

6 Classification and status

International classification (ICS): 53.100

Chinese Standard Classification (CCS): P 97

Prefix JB/T: recommended standard.