JB/T 2983-2015Crawler bulldozer - Track rollers (English PDF)
履带式推土机 支重轮
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 2983-2015 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
October 10, 2015
Implementation date
March 1, 2016
Scope
JB/T 2983-2015 is the English-translated version of 履带式推土机 支重轮.
JB/T 2983-2015 is a recommended Chinese machinery industry standard on the track rollers of crawler bulldozers. It covers their structural type and main dimensions, their marking, the requirements they must meet, the testing methods, the inspection rules, and packaging, transportation and storage.
It applies to track rollers for track pitches of 190 mm, 203 mm, 216 mm and 228.6 mm, and it may be taken as a reference for track rollers of other pitches. Among the standards it quotes are GB/T 230.1, GB/T 231.1, GB/T 1184, GB/T 1804, GB/T 1958, GB/T 2828.1, GB/T 2829 and JB/T 7158.
It replaces JB/T 2983.1-1998, and carries Chinese classification P97 with international classification 53.100.
Found what you need?
Document preview — JB/T 2983-2015
National Standard of the People's Republic of China
- ICS
- 53.100
- Replacing
- JB/T 2983.1-1998
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- Scope
- Normative references
- About this standard
- Related standards
- Classification and status
1 Foreword
JB/T 2983-2015 was issued by MIIT on 10 October 2015 and has been in force since 1 March 2016.
It is one of 3 parts of the JB/T 2983 series.
2 Scope
This standard is a recommended Chinese machinery industry standard on the track rollers of crawler bulldozers. It covers their structural type and main dimensions, their marking, the requirements they must meet, the testing methods, the inspection rules, and packaging, transportation and storage. It applies to track rollers for track pitches of 190 mm, 203 mm, 216 mm and 228.6 mm, and it may be taken as a reference for track rollers of other pitches. Among the standards it quotes are GB/T 230.1, GB/T 231.1, GB/T 1184, GB/T 1804, GB/T 1958, GB/T 2828.1, GB/T 2829 and JB/T 7158. It replaces JB/T 2983.1-1998, and carries Chinese classification P97 with international classification 53.100.
3 Normative references
JB/T 2983-2015 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 230.1
GB/T 231.1
GB/T 1184
GB/T 1804
GB/T 1958
GB/T 2828.1
GB/T 2829
JB/T 7158
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Related standards
Other parts of this standard:
JB/T 2983.1-1998 — Crawler bulldozers - Track rollers
JB/T 2983.2-2001 — Crawler dozers - Idlers
6 Classification and status
International classification (ICS): 53.100
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 230.1Metallic materials - Rockwell hardness test - Part 1: Test method
- GB/T 231.1Metallic materials - Brinell hardness test - Part 1: Test method
- GB/T 1184Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
- GB/T 1804General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
- GB/T 1958Geometrical Product Specifications(GPS)—Geometrical tolerance—Verification
- GB/T 2828.1Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
Similar standards
Editions of JB/T 2983
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 2983-2015 | Crawler bulldozer - Track rollers | current edition | Current |
| JB/T 2983.1-1998 | Crawler bulldozer - Track rollers | previous edition | Superseded |
This page sells the current edition, JB/T 2983-2015. Earlier editions are listed for reference only.
How to Download JB/T 2983-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
GB/T 1804-2000 — General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
GB/T 1958-2017 — Geometrical Product Specifications(GPS)—Geometrical tolerance—Verification
Secure payment via Stripe
Payments accepted
JB/T 2983-2015
$199.00