JB/T 10759-2017Construction machinery - High temperature and high pressure hydraulic fluid power hose assemblies (English PDF)
工程机械 高温高压液压软管总成
This is a limited preview
Buy now to download the full PDF (20 pages)
Need quotation for your management?
Get a formal quotation for JB/T 10759-2017 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 12, 2017
Implementation date
January 1, 2018
Scope
JB/T 10759-2017 is the English-translated version of 工程机械 高温高压液压软管总成.
JB/T 10759-2017 is the Chinese machinery industry standard covering high temperature and high pressure hydraulic fluid power hose assemblies for construction machinery.
It deals with steel wire braided and steel wire wound reinforced rubber hose assemblies of nominal inner diameter from 5 mm to 51 mm, setting their classification and marking, their basic parameters and structural types, the requirements they have to meet and the test methods, together with the inspection rules, marking, packaging, transport and storage.
Among the documents applied together with it are GB/T 3683, GB/T 7935, GB/T 9065.1, GB/T 10544-2013, GB/T 14034.1-2010, JB/T 7858, JB/T 8727, ISO 6162-1 and ISO 8434-2-2007. It supersedes JB/T 10759-2007 and is classified P97 and 53.100.
Found what you need?
Document preview — JB/T 10759-2017
National Standard of the People's Republic of China
- ICS
- 53.100
- Replacing
- JB/T 10759-2007
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 1 Scope
- 2 Normative references
1 Foreword
JB/T 10759-2017 was issued by MIIT on 12 April 2017.
It replaces the earlier edition JB/T 10759-2007.
2 Scope
This standard is the Chinese machinery industry standard covering high temperature and high pressure hydraulic fluid power hose assemblies for construction machinery. It deals with steel wire braided and steel wire wound reinforced rubber hose assemblies of nominal inner diameter from 5 mm to 51 mm, setting their classification and marking, their basic parameters and structural types, the requirements they have to meet and the test methods, together with the inspection rules, marking, packaging, transport and storage. Among the documents applied together with it are GB/T 3683, GB/T 7935, GB/T 9065.1, GB/T 10544-2013, GB/T 14034.1-2010, JB/T 7858, JB/T 8727, ISO 6162-1 and ISO 8434-2-2007. It supersedes JB/T 10759-2007 and is classified P97 and 53.100.
3 Normative references
JB/T 10759-2017 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 3103.1
GB/T 3683
GB/T 7631.2-2003 — Lubricants, industrial oils and related products (class L) -- Classification -- Part 2: Family H (Hydraulic systems)
GB/T 7935
GB/T 7939
GB/T 9065.1
GB/T 9065.2
GB/T 9065.5
GB/T 9576
GB/T 9577
GB/T 10544-2013
GB/T 14034.1-2010
GB/T 14039
JB/T 7858
JB/T 8727
ISO 6162-1
ISO 6162-2
ISO 8434-2-2007
ISO 8434-3-2005
4 About this standard
Issued by: MIIT
English translation: about 20 pages
5 Related standards
Other editions:
JB/T 10759-2007 (earlier edition)
6 Classification and status
International classification (ICS): 53.100
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 3103.1Tolerances for fasteners -- Bolts, screws, studs and nuts
- GB/T 3683Rubber hoses and hose assemblies - Wire-braid-reinforced hydraulic types for oil-based or water-based fluids - Specification
- GB/T 7631.2-2003Lubricants, industrial oils and related products (class L) -- Classification -- Part 2: Family H (Hydraulic systems)
- GB/T 7935Hydraulic fluid power - General requirements for hydraulic components
- GB/T 7939Connections for hydraulic fluid power - Test methods - Part 1: Connectors
- GB/T 9065.1Hydraulic hose fittings -- Part 1: Hose fittings with O-ring face seal ends
ISO 6162-1 · ISO 6162-2 · ISO 8434-2-2007 · ISO 8434-3-2005
Similar standards
Editions of JB/T 10759
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 10759-2017 | Construction machinery - High temperature and high pressure hydraulic fluid power hose assemblies | current edition | Current |
| JB/T 10759-2007 | Construction machinery - High temperature and high pressure hydraulic fluid power hose assemblies | previous edition | Superseded |
This page sells the current edition, JB/T 10759-2017. Earlier editions are listed for reference only.
How to Download JB/T 10759-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 14039-2002 — Hydraulic fluid power -- Fluids -- Method for coding the level of contamination by solid particles
GB/T 14039-2026 — Hydraulic fluid power—Contamination analysis—Method for coding the level of contamination by solid particles
GB/T 3103.1-2002 — Tolerances for fasteners -- Bolts, screws, studs and nuts
Secure payment via Stripe
Payments accepted
JB/T 10759-2017
$455.00