JB/T 10660-2015Non-destructive testing - Ultrasonic testing of forged steel materials - Testing of connecting rod bolts (English PDF)
无损检测 锻钢材料超声检测 连杆螺栓的检测
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 10660-2015 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 30, 2015
Implementation date
October 1, 2015
Scope
JB/T 10660-2015 is the English-translated version of 无损检测 锻钢材料超声检测 连杆螺栓的检测.
Connecting rod bolts made of forged steel are the subject of JB/T 10660-2015, a recommended standard of the Chinese machinery industry. It lays down how such bolts are examined by ultrasound and how the findings are sorted into quality classes.
It is intended for the connecting rod bolts of engines with a cylinder bore below 300 mm, and it also covers the bolts of motorcycle engines. It quotes GB/T 5616, GB/T 4162, GB/T 12604.1 and GB/T 23908. The standard replaces the 2006 edition, JB/T 10660-2006.
Found what you need?
Document preview — JB/T 10660-2015
National Standard of the People's Republic of China
- Replacing
- JB/T 10660-2006
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 10660-2015 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 30 April 2015 and has been in force since 1 October 2015.
It replaces the earlier edition JB/T 10660-2006.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
Connecting rod bolts made of forged steel are the subject of JB/T 10660-2015, a recommended standard of the Chinese machinery industry. It lays down how such bolts are examined by ultrasound and how the findings are sorted into quality classes. It is intended for the connecting rod bolts of engines with a cylinder bore below 300 mm, and it also covers the bolts of motorcycle engines. It quotes GB/T 5616, GB/T 4162, GB/T 12604.1 and GB/T 23908. The standard replaces the 2006 edition, JB/T 10660-2006.
JB/T 10660-2015 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,316 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 Normative references
GB/T 4162
GB/T 5616
GB/T 9445
GB/T 12604.1
GB/T 18694
GB/T 18852
GB/T 23908
GB/T 23912
JB/T 9214
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 10660-2006 (earlier edition)
Standards on related subjects:
GB/T 10610-2009 — Geometrical product specifications (GPS) -- Surface texture: Profile method -- Rules and procedures for the assessment of surface texture
GB/T 10609.1-2008 — Technical drawings - Title blocks
JB/T 6063-2006 — Non-destructive testing - Materials for magnetic particle testing
JB/T 10661-2015 — Non-destructive testing - Ultrasonic testing of forged steel materials - Testing of universal joints
JB/T 10659-2015 — Non-destructive testing - Ultrasonic testing of forged steel materials - Testing of connecting rods
JB/T 10662-2013 — Nondestructive Testing - Ultrasonic Testing of Polyethylene Pipe Line Weld Seams
6 Classification and status
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 4162Method for ultrasonic testing of forged and rolled steel bars
- GB/T 5616Non-destructive testing—Guidelines for application
- GB/T 9445Non-destructive testing - Qualification and certification of personnels
- GB/T 12604.1Non-destructive testing - Terminology - Ultrasonic testing
- GB/T 18694Non-destructive testing -- Ultrasonic inspection -- Characterization of search unit and sound field
- GB/T 18852Non-destructive testing. Ultrasonic testing. Reference blocks and test procedures for the characterization of contact probe sound beams
Similar standards
Editions of JB/T 10660
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 10660-2015 | Non-destructive testing - Ultrasonic testing of forged steel materials - Testing of connecting rod bolts | current edition | Current |
| JB/T 10660-2006 | Non-destructive testing - Ultrasonic testing of forged steel materials - Testing of connecting rod bolts | previous edition | Superseded |
This page sells the current edition, JB/T 10660-2015. Earlier editions are listed for reference only.
How to Download JB/T 10660-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 12604.1-1990 — Terminology for nondestructive testing--Ultrasonic testing
GB/T 12604.1-2005 — Non-destructive testing - Terminology - Terms used in ultrasonic testing
GB/T 12604.1-2020 — Non-destructive testing - Terminology - Ultrasonic testing
JB/T 10660-2015
$269.00