JB/T 10572-2013Universal length measuring instruments (English PDF)
万能测长仪
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 10572-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 31, 2013
Implementation date
July 1, 2014
Scope
JB/T 10572-2013 is the English-translated version of 万能测长仪.
JB/T 10572-2013 is a recommended Chinese machinery industry standard, and its subject is the universal length measuring instrument.
The document fixes the terms and definitions used for the instrument, sets out its classifications and its basic parameters, states the requirements it must satisfy, and then gives the test methods, the inspection rules, and the marking and packaging provisions.
The earlier edition that JB/T 10572-2013 replaces is JB/T 10572-2006. Chinese classification N34 and international classification 37.020 are the codes recorded for it.
Among the standards it quotes are GB/T 2828.1, GB/T 2829, GB/T 11162, GB/T 13384, GB/T 25480, JB/T 9342-1999 and JB/T 10575.
Found what you need?
Document preview — JB/T 10572-2013
National Standard of the People's Republic of China
- ICS
- 37.020
- Replacing
- JB/T 10572-2006
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 10572-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 31 December 2013 and has been in force since 1 July 2014.
It replaces the earlier edition JB/T 10572-2006.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard, and its subject is the universal length measuring instrument. The document fixes the terms and definitions used for the instrument, sets out its classifications and its basic parameters, states the requirements it must satisfy, and then gives the test methods, the inspection rules, and the marking and packaging provisions. The earlier edition that JB/T 10572-2013 replaces is JB/T 10572-2006. Chinese classification N34 and international classification 37.020 are the codes recorded for it. Among the standards it quotes are GB/T 2828.1, GB/T 2829, GB/T 11162, GB/T 13384, GB/T 25480, JB/T 9342-1999 and JB/T 10575.
JB/T 10572-2013 falls under ICS 37.020, in the field of image technology.
This catalogue holds 169 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 2828.1
GB/T 2829
GB/T 11162
GB/T 13384
GB/T 25480
JB/T 9342-1999 — Measuring caps for optical metrological instruments
JB/T 10575
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 10572-2006 (earlier edition)
Standards on related subjects:
GB/T 32387-2015 — Color assessment booth
GB/T 17341-1998 — [GB/T 17341-1998] Optics and optical instruments. Focimeters
JB/T 7403-1994 — Illuminance meters
JB/T 10571-2014 — Length Measuring Machine
JB/T 10574-2013 — Optical Length Measuring Instruments - Basic Parameters
JB/T 10573-2013 — Toolmaker's microscopes
6 Classification and status
International classification (ICS): 37.020
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 2828.1Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- GB/T 2829Sampling procedures and tables for periodic inspection by attributes
- GB/T 11162General specification of optical components for the scale and surface defects
- GB/T 13384General specifications for packing of mechanical and electrical product
- GB/T 25480Basic environmental conditions and testing methods for transportation and storage of instruments
- JB/T 9342-1999Gauge hat for optical metrical instrument
Similar standards
Editions of JB/T 10572
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 10572-2013 | Universal length measuring instruments | current edition | Current |
| JB/T 10572-2006 | Universal length measuring instruments | previous edition | Superseded |
This page sells the current edition, JB/T 10572-2013. Earlier editions are listed for reference only.
How to Download JB/T 10572-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 11162-1989 — General specification of optical components for the scale and surface defects
GB/T 11162-2009 — General specification of optical components for the scale and surface defects
GB/T 13384-1992 — General speifications for packagings of mechanical and electrical products
JB/T 10572-2013
$479.00