Valid

GB/T 26097-2010Inductive length measuring instrument with digital display (English PDF)

数显电感测微仪

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 26097-2010 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

January 10, 2011

Implementation date

October 1, 2011

Scope

GB/T 26097-2010 is the English-translated version of 数显电感测微仪.

GB/T 26097-2010 covers the inductive length measuring instrument with digital display, which the page also calls the digital inductance micrometer and which the standard shortens to the "Micrometer".

Clause 1 states that it specifies terms and definitions, types and basic parameters, requirements, test methods, inspection rules, marking and packaging, and that it applies to instruments with a resolution of 0.01 µm, 0.1 µm or 1 µm and a range of not more than 2 mm; no exclusion is given.

As far as the draft reaches, the body runs Scope, Normative references, Terms and Definitions and Types and basic parameters, with one informative Appendix A, so the requirements, test methods, inspection rules, marking and packaging announced in clause 1 are not shown.

Clause 3 defines no term of its own: it makes the terms and definitions established in GB/T 17163-2008 and GB/T 17164-2008 applicable.

Clause 4 describes the instrument as a digital display plus a sensor and refers its types and clamping dimensions to Figures 1 to 4, noting that the illustrations serve for illustration only and do not show the detailed construction; the draft breaks off there.

Clause 2 cites GB/T 191-2008, GB 4208-2008, GB/T 4879-1999, GB/T 5048-1999, GB/T 6388-1986, GB/T 9969-2008, GB/T 14436-1993, GB/T 17163-2008, GB/T 17164-2008, GB/T 17626.2-2006 and GB/T 17626.3-2006.

It was proposed by China Machinery Industry Federation, administered by the National Standardization Technical Committee measuring instrument (SAC/TC132) and drafted by the Central Plains Meter Company. It was issued on 2011-01-10 and has applied since 2011-10-01.

Found what you need?

Document preview — GB/T 26097-2010

National Standard of the People's Republic of China

ICS: 17.040.30
Classification: J 42

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Foreword
1 Scope
2 Normative references
3 Terms and Definitions GB/T 17163-2008
4 Types and basic parameters

Foreword

Appendix A of this standard is an informative annex. The standard proposed by China Machinery Industry Federation.

The standard measuring instrument by the National Standardization Technical Committee (SAC/TC132) centralized.

1 Scope

This standard specifies the number of significant inductance micrometer terms and definitions, and basic parameters, requirements, test methods, inspection rules, marking and Packaging.

This standard applies to the number of resolution of 0.01µm, 0.1µm, 1µm, the range of not more than 2mm substantial inductance micrometer (hereinafter referred to as "Micrometer").

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.

GB/T 191-2008 Packaging - Pictorial signs (ISO 780:1997, MOD)

GB 4208-2008 housing protection (IP Code) (IEC 60529:2001, IDT)

GB/T 4879-1999 rust-proof packaging

GB/T 5048-1999 proof packaging

GB/T 6388-1986 transport package shipping mark

GB/T 9969-2008 General Industrial Product Manual

GB/T 14436-1993 General industrial products assurance documents

GB/T 17163-2008 dimensional measuring instruments - Basic terminology

GB/T 17164-2008 dimensional measuring instruments - Product terms

GB/T 17626.2-2006 Electromagnetic compatibility - Testing and measurement techniques - Electrostatic discharge immunity test (IEC 61000-4-2:2001, IDT)

GB/T 17626.3-2006 Electromagnetic compatibility - Testing and measurement techniques RFEMS test (IEC 61000-4-3:2002, IDT)

3 Terms and Definitions

GB/T 17163-2008 terms and definitions GB/T 17164-2008 established in applicable to this standard.

4 Types and basic parameters

4.1 Type

Micrometer by the digital displays and sensors, the type and clamping dimensions shown in Figure 1 to 4. Illustration illustration purposes only, not It shows the detailed construction.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

GB 4208-2008 · GB/T 14436-1993

Similar standards

GB/T 19878-2026|GB/T 47121-2026|GB/T 10922-2025|GB/T 24468-2025|GB/T 34874.1-2025|GB/T 34874.4-2025

How to Download GB/T 26097-2010

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.