JB/T 10554.1-2015Non-destructive testing - Ultrasonic testing of ductile iron shafts - Part 1: General principles (English PDF)
无损检测 轴类球墨铸铁超声检测 第1部分:总则
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 10554.1-2015 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 30, 2015
Implementation date
October 1, 2015
Scope
JB/T 10554.1-2015 is the English-translated version of 无损检测 轴类球墨铸铁超声检测 第1部分:总则.
The first part of JB/T 10554, dated 2015, is the recommended Chinese standard on the ultrasonic testing of ductile, or nodular, cast iron, and it holds the general principles.
It sets out the ultrasonic testing methods and the quality grading for ductile cast iron materials and for the workpieces made from them. It applies where the thickness lies between 10 mm and 500 mm.
GB/T 5616 is to be followed alongside it. Among its other quoted standards are GB/T 1348, GB/T 9441, GB/T 9445, GB/T 18694, GB/T 23908 and JB/T 9214. It replaces JB/T 10554.1-2006.
Found what you need?
Document preview — JB/T 10554.1-2015
National Standard of the People's Republic of China
- Replacing
- JB/T 10554.1-2006
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 10554.1-2015 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 30 April 2015 and has been in force since 1 October 2015.
It replaces the earlier edition JB/T 10554.1-2006.
It is one of 3 parts of the JB/T 10554 series.
2 Scope Preview
The first part of JB/T 10554, dated 2015, is the recommended Chinese standard on the ultrasonic testing of ductile, or nodular, cast iron, and it holds the general principles. It sets out the ultrasonic testing methods and the quality grading for ductile cast iron materials and for the workpieces made from them. It applies where the thickness lies between 10 mm and 500 mm. GB/T 5616 is to be followed alongside it. Among its other quoted standards are GB/T 1348, GB/T 9441, GB/T 9445, GB/T 18694, GB/T 23908 and JB/T 9214. It replaces JB/T 10554.1-2006.
JB/T 10554.1-2015 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,316 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 Normative references
GB/T 1348
GB/T 5616
GB/T 9441
GB/T 9445
GB/T 12604.1
GB/T 18694
GB/T 18852
GB/T 23908
GB/T 23912
JB/T 3829
JB/T 9214
4 Where this standard sits
It cites 11 standards, listed in full above.
It is one part of the JB/T 10554 series, of which this catalogue holds 3 parts.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
6 Related standards
Other parts of this standard:
JB/T 10554.2-2006 — Non-destructive testing - Ultrasonic testing of nodular cast iron shafts - Part 2: Nodular cast iron crankshafts
JB/T 10554.2-2015 — Non-destructive testing - Ultrasonic testing of nodular cast iron shafts - Part 2: Testing of nodular cast iron crankshafts
Other editions:
JB/T 10554.1-2006 (earlier edition)
Standards on related subjects:
GB/T 10610-2009 — Geometrical product specifications (GPS) -- Surface texture: Profile method -- Rules and procedures for the assessment of surface texture
GB/T 10609.1-2008 — Technical drawings - Title blocks
JB/T 6063-2006 — Non-destructive testing - Materials for magnetic particle testing
JB/T 11130-2025 — Industrial Endoscopes
JB/T 10555-2013 — Non-destructive testing - Ultrasonic testing of engine valves
7 Classification and status
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 1348Spheroidal graphite iron castings
- GB/T 5616Non-destructive testing—Guidelines for application
- GB/T 9441Metallographic test method for spheroidal graphite cast iron
- GB/T 9445Non-destructive testing - Qualification and certification of personnels
- GB/T 12604.1Non-destructive testing - Terminology - Ultrasonic testing
- GB/T 18694Non-destructive testing -- Ultrasonic inspection -- Characterization of search unit and sound field
Similar standards
Editions of JB/T 10554.1
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 10554.1-2015 | Non-destructive testing - Ultrasonic testing of ductile iron shafts - Part 1: General principles | current edition | Current |
| JB/T 10554.1-2006 | Non-destructive testing - Ultrasonic testing of ductile iron shafts - Part 1: General principles | previous edition | Superseded |
This page sells the current edition, JB/T 10554.1-2015. Earlier editions are listed for reference only.
How to Download JB/T 10554.1-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 12604.1-1990 — Terminology for nondestructive testing--Ultrasonic testing
GB/T 12604.1-2005 — Non-destructive testing - Terminology - Terms used in ultrasonic testing
GB/T 12604.1-2020 — Non-destructive testing - Terminology - Ultrasonic testing
JB/T 10554.1-2015
$419.00