Valid

JB/T 10327-2011Fire resistant busbar trunking systems (fire resistant busways) (English PDF)

耐火母线干线系统(耐火母线槽)

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 10327-2011 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

December 20, 2011

Implementation date

April 1, 2012

Scope

JB/T 10327-2011 is the English-translated version of 耐火母线干线系统(耐火母线槽).

JB/T 10327-2011 is a recommended Chinese machinery industry standard for fire resistant busbar trunking systems, also called fire resistant busways. It gives the terms and definitions, the product classification, the conditions of use, the technical requirements and the verification methods.

Busways with rated voltages not exceeding 1000 V, 1140 V included, at a frequency of 50 Hz or 60 Hz fall within it, in residential, commercial, public, agricultural and industrial buildings, as do lighting busbar systems supplied through tap-off units and busbar systems serving communication and control systems.

Components selected within a busbar system, such as circuit breakers, are outside it and follow their own standards. Among the standards it quotes are GB 4208-2008, GB 7251.1-2005, GA/T 537-2005 and JB/T 3085. It supersedes JB/T 10327-2002.

Found what you need?

Document preview — JB/T 10327-2011

National Standard of the People's Republic of China

ICS
29.120
Replacing
JB/T 10327-2002

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Model designation
  • 6 Test methods
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 8 Marking, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 Packaging

1 Foreword

JB/T 10327-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 20 December 2011 and has been in force since 1 April 2012.

It replaces the earlier edition JB/T 10327-2002.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard is a recommended Chinese machinery industry standard for fire resistant busbar trunking systems, also called fire resistant busways. It gives the terms and definitions, the product classification, the conditions of use, the technical requirements and the verification methods. Busways with rated voltages not exceeding 1000 V, 1140 V included, at a frequency of 50 Hz or 60 Hz fall within it, in residential, commercial, public, agricultural and industrial buildings, as do lighting busbar systems supplied through tap-off units and busbar systems serving communication and control systems. Components selected within a busbar system, such as circuit breakers, are outside it and follow their own standards. Among the standards it quotes are GB 4208-2008, GB 7251.1-2005, GA/T 537-2005 and JB/T 3085. It supersedes JB/T 10327-2002.

JB/T 10327-2011 falls under ICS 29.120, in the field of electrical engineering.

This catalogue holds 619 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

GB 4208-2008 — Degrees of Protection Provided By Enclosure (IP Code)

GB 7251.1-2005 — Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies

GB 7251.2-2006 — Low-voltage switchgear and controlgear assemblies - Part 2: Particular requirements for busbar trunking systems (busways)

GA/T 537-2005 — Flame-retardant, fire-proof, fire resistance specifications of testing method of bus bar trunking system (busways)

JB/T 3085

4 Where this standard sits

It cites 5 standards, among them GB 4208-2008, GB 7251.1-2005, GB 7251.2-2006, listed in full above.

One other standard in this catalogue cites it: JB/T 13690-2019.

5 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

6 Related standards

Other editions:

JB/T 10327-2002 (earlier edition)

Standards on related subjects:

GB/T 7251.2-2023 — Low-voltage switchgear and controlgear assemblies - Part 2: Power switchgear and controlgear assemblies

GB/T 7251.6-2015 — Low-voltage switchgear and controlgear assemblies -- Part 6: Busbar trunking systems (busways)

GB 7251.12-2013 — [GB/T 7251.12-2013] Low-voltage switchgear and controlgear assemblies -- Part 2: Power switchgear and controlgear assemblies

JB/T 14947-2025 — Technical requirements for digital workshop of miniature circuit breakers

JB/T 14942-2025 — Technical specifications for evaluation of green design products - Plastic enclosure circuit breaker

JB/T 14941-2025 — Technical specifications for evaluation of green design products - Circuit-breakers for overcurrent protection for household and similar installations

7 Classification and status

International classification (ICS): 29.120

Chinese Standard Classification (CCS): K 31

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of JB/T 10327

EditionTitleRevisionStatus
JB/T 10327-2011Fire resistant busbar trunking systems (fire resistant busways)current editionCurrent
JB/T 10327-2002Fire resistant busbar trunking systems (fire resistant busways)previous editionSuperseded

This page sells the current edition, JB/T 10327-2011. Earlier editions are listed for reference only.

How to Download JB/T 10327-2011

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 10327-2011

$175.00