JB/T 10296-2013Design Regulation on Greenhouse Electrical Wiring (English PDF)
温室电气布线设计规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 10296-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 31, 2013
Implementation date
July 1, 2014
Scope
JB/T 10296-2013 is the English-translated version of 温室电气布线设计规范.
JB/T 10296-2013 is a recommended Chinese machinery industry standard on the design of electrical wiring inside greenhouses. It lays down the principles governing the power and signal wires and cables run within a greenhouse, the requirements for installing them, and the arrangements for inspection and acceptance.
Electrical wiring of every kind installed inside a greenhouse falls within it. The Ministry of Industry and Information Technology issued the document, which carries the classifications P35 and 65.040.30.
Among the standards it quotes are GB 4208-2008, GB 5226.1, GB 7947, GB 13955-2005 and GB/T 22764.4. It replaces JB/T 10296-2001.
Found what you need?
Document preview — JB/T 10296-2013
National Standard of the People's Republic of China
- ICS
- 65.040.30
- Replacing
- JB/T 10296-2001
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 10296-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 31 December 2013 and has been in force since 1 July 2014.
It replaces the earlier edition JB/T 10296-2001.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard on the design of electrical wiring inside greenhouses. It lays down the principles governing the power and signal wires and cables run within a greenhouse, the requirements for installing them, and the arrangements for inspection and acceptance. Electrical wiring of every kind installed inside a greenhouse falls within it. The Ministry of Industry and Information Technology issued the document, which carries the classifications P35 and 65.040.30. Among the standards it quotes are GB 4208-2008, GB 5226.1, GB 7947, GB 13955-2005 and GB/T 22764.4. It replaces JB/T 10296-2001.
JB/T 10296-2013 falls under ICS 65.040.30, in the field of agriculture.
This catalogue holds 368 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB 4208-2008 — Degrees of Protection Provided By Enclosure (IP Code)
GB 5226.1
GB 7947
GB 13955-2005 — Installation and Operation of Residual Current Operated Protective Devices
GB/T 22764.4
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 10296-2001 (earlier edition)
Standards on related subjects:
GB 50144-2019 — Standard for appraisal of reliability of industrial buildings and structures
GB/T 50046-2018 — Standard for anticorrosion design of industrial constructions
SN/T 4233-2015 — Requirements for construction of designated quarantine facilities for imported cattle and sheep(or goats)
JB/T 10294-2013 — Wet Pad Cooling System
JB/T 10288-2013 — Specifications for Multi-span Greenhouse
JB/T 10286-2013 — Specifications for Solar Greenhouse
6 Classification and status
International classification (ICS): 65.040.30
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 4208-2008Degrees of Protection Provided By Enclosure (IP Code)
- GB 5226.1Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
- GB 7947Basic and safety principles for man machine interface,marking and identification—Identification of conductors by colours or alphanumerics
- GB 13955-2005Installation and Operation of Residual Current Operated Protective Devices
- GB/T 22764.4Cabinets for low-voltage switchgear - Part 4: Electrical safety requirements
Similar standards
Editions of JB/T 10296
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 10296-2013 | Design Regulation on Greenhouse Electrical Wiring | current edition | Current |
| JB/T 10296-2001 | Design Regulation on Greenhouse Electrical Wiring | previous edition | Superseded |
This page sells the current edition, JB/T 10296-2013. Earlier editions are listed for reference only.
How to Download JB/T 10296-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 13955-2005 — Installation and Operation of Residual Current Operated Protective Devices
GB 4208-2008 — Degrees of Protection Provided By Enclosure (IP Code)
GB 5226.1-2002 — Safety of machinery - Electrical equipment of machines - Part 1: General requirements
JB/T 10296-2013
$229.00