Valid

JB/T 10265-2014Upper and Lower Disk Forgings for Hydraulic Generators - Technical Specification (English PDF)

水轮发电机上下圆盘锻件 技术条件

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 10265-2014 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

July 9, 2014

Implementation date

November 1, 2014

Scope

JB/T 10265-2014 is the English-translated version of 水轮发电机上下圆盘锻件 技术条件.

JB/T 10265-2014 is a recommended Chinese machinery industry standard for the upper and lower disc forgings fitted to hydraulic generators. It sets the requirements that apply when such forgings are ordered, the manufacturing process, the technical requirements, the inspection rules and test methods, and the quality certificate and marking.

Its scope is the ordering of upper and lower disc forgings for hydraulic generators. The Chinese classification is J32 and the international one 77.140.85, and the issuing body is the Ministry of Industry and Information Technology.

Among the standards it quotes are GB/T 223.11, GB/T 223.14, GB/T 223.18 and GB/T 223.25. It replaces the earlier edition JB/T 10265-2001.

Found what you need?

Document preview — JB/T 10265-2014

National Standard of the People's Republic of China

ICS
77.140.85
Replacing
JB/T 10265-2001

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Model designation
  • 6 Test methods
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 8 Marking, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 Packaging

1 Foreword

JB/T 10265-2014 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 9 July 2014 and has been in force since 1 November 2014.

It replaces the earlier edition JB/T 10265-2001.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard is a recommended Chinese machinery industry standard for the upper and lower disc forgings fitted to hydraulic generators. It sets the requirements that apply when such forgings are ordered, the manufacturing process, the technical requirements, the inspection rules and test methods, and the quality certificate and marking. Its scope is the ordering of upper and lower disc forgings for hydraulic generators. The Chinese classification is J32 and the international one 77.140.85, and the issuing body is the Ministry of Industry and Information Technology. Among the standards it quotes are GB/T 223.11, GB/T 223.14, GB/T 223.18 and GB/T 223.25. It replaces the earlier edition JB/T 10265-2001.

JB/T 10265-2014 falls under ICS 77.140.85, in the field of metallurgy.

This catalogue holds 222 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

GB/T 223.11

GB/T 223.12

GB/T 223.13

GB/T 223.14

GB/T 223.16

GB/T 223.17

GB/T 223.18

GB/T 223.19

GB/T 223.20

GB/T 223.21

GB/T 223.22

GB/T 223.23

GB/T 223.25

GB/T 223.26

GB/T 223.28

GB/T 223.29

GB/T 223.30

GB/T 223.31

GB/T 223.3

GB/T 223.

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Other editions:

JB/T 10265-2001 (earlier edition)

Standards on related subjects:

JB/T 6401-2017 — Steels for large roll forgings - Technical requirements

GB/T 12362-2016 — Steel die forgings - Tolerance and machining allowance

GB/T 12361-2016 — Steel die forgings - General specification

JB/T 14894-2025 — Rail transit equipment - Steel die forgings - General Technical Specifications

JB/T 11024-2025 — Welded rotor forgings for steam turbines of large nuclear power units - Technical specification

JB/T 11020-2025 — Ultrapure steel low-pressure rotor forgings for steam turbines of supercritical and ultra-supercritical units - Technical specification

6 Classification and status

International classification (ICS): 77.140.85

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

GB/T 223.

Similar standards

Editions of JB/T 10265

EditionTitleRevisionStatus
JB/T 10265-2014Upper and Lower Disk Forgings for Hydraulic Generators - Technical Specificationcurrent editionCurrent
JB/T 10265-2001Upper and Lower Disk Forgings for Hydraulic Generators - Technical Specificationprevious editionSuperseded

This page sells the current edition, JB/T 10265-2014. Earlier editions are listed for reference only.

How to Download JB/T 10265-2014

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 10265-2014

$85.00