JB/T 10184-2014General Specification for AC Servo Driver (English PDF)
交流伺服驱动器通用技术条件
This is a limited preview
Buy now to download the full PDF (17 pages)
Need quotation for your management?
Get a formal quotation for JB/T 10184-2014 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 6, 2014
Implementation date
October 1, 2014
Scope
JB/T 10184-2014 is the English-translated version of 交流伺服驱动器通用技术条件.
JB/T 10184-2014 is a recommended Chinese machinery industry standard that gives the general specification for AC servo drivers. It states the operating conditions for the drive, the technical requirements it must satisfy, the test methods, the inspection rules and what is to be made ready for delivery.
Its scope reaches AC servo drivers whose input supply is an AC voltage not exceeding 1000 V. The document is classified as K24 in the Chinese scheme and 29.160.30 in the international scheme.
Among the standards it quotes are GB/T 2423.1, GB/T 2828.1-2012, GB/T 3797-2005, GB 4208, GB 5226.1 and GB/T 7345-2008. It replaces JB/T 10184-2000.
Found what you need?
Document preview — JB/T 10184-2014
National Standard of the People's Republic of China
- ICS
- 29.160.30
- Replacing
- JB/T 10184-2000
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
1 Foreword
JB/T 10184-2014 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 6 May 2014 and has been in force since 1 October 2014.
It replaces the earlier edition JB/T 10184-2000.
2 Scope
This standard is a recommended Chinese machinery industry standard that gives the general specification for AC servo drivers. It states the operating conditions for the drive, the technical requirements it must satisfy, the test methods, the inspection rules and what is to be made ready for delivery. Its scope reaches AC servo drivers whose input supply is an AC voltage not exceeding 1000 V. The document is classified as K24 in the Chinese scheme and 29.160.30 in the international scheme. Among the standards it quotes are GB/T 2423.1, GB/T 2828.1-2012, GB/T 3797-2005, GB 4208, GB 5226.1 and GB/T 7345-2008. It replaces JB/T 10184-2000.
3 Normative references
JB/T 10184-2014 cites a number of standards, which apply in full or in part through the references made to them in its clauses. Those listed below are the ones the catalogue record shows; the record cuts the list short, so it may not be complete.
GB/T 2423.1
GB/T 2423.2
GB/T 2423.3
GB/T 2423.5
GB/T 2423.8
GB/T 2423.10
GB/T 2828.1-2012 — Plain bearings -- Quality characteristics -- Statistical process control (SPC)
GB/T 3797-2005
GB 4208
GB/T 4588.2-1996 — Sectional specification: single and double sided printed boards with plated-through holes
GB/T 4588.4-1996
GB 4824
GB/T 5080.1-2012 — Reliability testing -- Part 1: Test conditions and statistical test principles
GB 5226.1
GB 7251.1-2005
GB/T 7345-2008 — General requirements for electrical machine for automatic control system
GB/T 10069.1
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 17 pages
5 Related standards
Other editions:
JB/T 10184-2000 (earlier edition)
6 Classification and status
International classification (ICS): 29.160.30
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 2423.1Environmental testing for electric and electronic products - Part 2: Test methods - Tests A: Cold
- GB/T 2423.2Environmental testing for electric and electronic products - Part 2: Test methods - Tests B: Dry heat
- GB/T 2423.3Environmental testing - Part 2: Testing method - Test Cab: Damp heat, steady state
- GB/T 2423.5Environmental testing - Part 2: Test methods - Test Ea and guidance: Shock
- GB/T 2423.8Environmental testing for electric and electronic products - Part 2: Test methods - Test Ed: Free fall
- GB/T 2423.10Environmental testing - Part 2: Test methods - Test Fc: Vibration (sinusoidal)
GB 4208
Similar standards
Editions of JB/T 10184
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 10184-2014 | General Specification for AC Servo Driver | current edition | Current |
| JB/T 10184-2000 | General Specification for AC Servo Driver | previous edition | Superseded |
This page sells the current edition, JB/T 10184-2014. Earlier editions are listed for reference only.
How to Download JB/T 10184-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 4824-1996 — Limits and methods of measurement of electromagnetic disturbance characteristics of industrial, scientific and medical (ISM) radio frequency equipment
GB 4824-2001 — Industrial, scientific and medical (ISM) radio-frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement
GB 4824-2004 — Industrial, scientific and medical (ISM) radio-frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement
Secure payment via Stripe
Payments accepted
JB/T 10184-2014
$295.00