Valid

JB/T 10075-2013Cold cathode ionization gauges (English PDF)

冷阴极电离真空计

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 10075-2013 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

December 31, 2013

Implementation date

July 1, 2014

Scope

JB/T 10075-2013 is the English-translated version of 冷阴极电离真空计.

JB/T 10075-2013 is a recommended Chinese machinery industry standard for cold cathode ionization vacuum gauges. It states the technical requirements for these instruments and the test methods used to verify them, then the inspection rules and the provisions for marking, packaging and storage.

It replaces the earlier edition, JB/T 10075-1999. The application stated in the text begins with gauges of the Penning type, used for the measurement of pressures above a lower limit that the standard fixes.

Among the standards it quotes are GB/T 2423.3-2006, GB/T 3163, GB/T 3369.1, GB/T 6107, GB/T 13384, JB/T 9329, QJ 2555 and BSR/TIA 574. The gauge is classified J78 in China and 23.160 internationally.

Found what you need?

Document preview — JB/T 10075-2013

National Standard of the People's Republic of China

ICS
23.160
Replacing
JB/T 10075-1999

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Model designation
  • 6 Test methods
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 8 Marking, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 Packaging

1 Foreword

JB/T 10075-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 31 December 2013 and has been in force since 1 July 2014.

It replaces the earlier edition JB/T 10075-1999.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard is a recommended Chinese machinery industry standard for cold cathode ionization vacuum gauges. It states the technical requirements for these instruments and the test methods used to verify them, then the inspection rules and the provisions for marking, packaging and storage. It replaces the earlier edition, JB/T 10075-1999. The application stated in the text begins with gauges of the Penning type, used for the measurement of pressures above a lower limit that the standard fixes. Among the standards it quotes are GB/T 2423.3-2006, GB/T 3163, GB/T 3369.1, GB/T 6107, GB/T 13384, JB/T 9329, QJ 2555 and BSR/TIA 574. The gauge is classified J78 in China and 23.160 internationally.

JB/T 10075-2013 falls under ICS 23.160, in the field of fluid systems and general-purpose components.

This catalogue holds 421 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

GB/T 2423.3-2006 — Environmental testing for electric and electronic products - Part 2: Testing method - Test Cab: Damp heat, steady state

GB/T 3163

GB/T 3369.1

GB/T 3369.2

GB/T 6107

GB/T 13384

JB/T 9329

QJ 2555

BSR/TIA 574

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Other editions:

JB/T 10075-1999 (earlier edition)

Standards on related subjects:

GB/T 10894-2023 — Determination method of separation machinery noise

JB/T 4333.2-2013 — Recessed plate filter press & plate and frame filter press - Part 2: Technical specifications

JB/T 8947-2008 — Rubber belts for fixed chamber belt vacuum filters

JB/T 14960-2025 — Minimum allowable values of the energy efficiency and energy efficiency grades for vacuum drying equipment systems

JB/T 11716-2025 — Screw type dry vacuum pump

JB/T 10076-2013 — Cold Cathode Ionization Vacuum Gauge Head

6 Classification and status

International classification (ICS): 23.160

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of JB/T 10075

EditionTitleRevisionStatus
JB/T 10075-2013Cold cathode ionization gaugescurrent editionCurrent
JB/T 10075-1999Cold cathode ionization gaugesprevious editionSuperseded

This page sells the current edition, JB/T 10075-2013. Earlier editions are listed for reference only.

How to Download JB/T 10075-2013

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 10075-2013

$229.00