HJ 2518-2012Technical requirement for environmental labeling products. Lighting source (English PDF)

3.1 Lighting source

A device that converts electrical energy into optical radiant energy and is used for illumination.

3.2 Recycling take-back

Activities for the collection and storage of waste products.

3.3 Recycling

Disposal of waste products to enable them to be reused as raw materials, but does not include the recovery and use of energy.

(GB/T 20861)

5.1 Product Environmental Protection Design Requirements

5.1.1 Plastic parts with a mass exceeding 25g or an area exceeding.200mm2 (except for the translucent cover) shall be marked with the material according to the requirements of GB/T 16288.

5.1.2 The survival rate of high-pressure sodium lamp and metal halide lamp source should meet the requirements of Table 1. The survival rate of other products is in accordance with the corresponding national standards.

Claim.

Table 1 Source survival requirements for high pressure sodium lamps and metal halide lamps

Product category color rendering index nominal power (W) 12000h light source survival rate High pressure sodium lamp - - >=95% Metal halide lamp >=80 <=70 >=60% >70; <=400 >=70% 150; <=400 >=70%

5.1.3 Requirements for hazardous substances in parts and components

5.1.3.1 Lamps and wick glass shall not be artificially added with lead (Pb), arsenic (As) or antimony (Sb), each of which contains Do not exceed 0.1% of the total mass of the glass part.

5.1.3.2 The limit of product electronic components (excluding glass or ceramic capacitors), plastic parts and solder hazardous substances shall comply with GB/T 26572 Claim.

5.1.3.3 Plastic parts with a mass of more than 5g shall not be used with materials whose base is a halogen polymer, of which short-chained chlorinated paraffins (SCCPs), the content of hexabromocyclododecane (HBCD) shall not exceed 0.1% of the mass of the part, and the amount of organic fluorine additive added in the fluoroplastic shall not More than 0.5% of the mass of the part.

5.1.3.4 The content of gallium arsenide (GaAs) in the LED lamp shall not exceed 0.1% of the mass of the LED component.

5.1.3.5 The 钍-232 (232Th) and 氪-85 (85Kr) activities of metal halide lamps shall comply with the requirements of GB 18871.

5.2 Product production stage requirements

5.2.1 Fluorescent lamps and high pressure sodium lamps shall not be subjected to the liquid mercury process.

5.2.1 Fluorescent lamps, high-pressure sodium lamps and metal halide lamps shall be provided with mercury collection and adsorption devices during the production process, and the reduction of mercury content shall be established.

Planning and management requirements to reduce mercury emissions.

5.2.3 Fluorescent lamps should be treated with an aqueous coating process.

5.2.4 The welding process with a melting point below 450 °C shall be carried out using a lead-free soldering process.

5.2.5 Do not use chromium compounds, hydrochlorofluorocarbons (HCFCs), 1,1,1-trichloroethane (C2H3Cl3), trichloroethylene (C2HCl3), Dichloroethane (CH3CHCl2), dichloromethane (CH2Cl2), chloroform (CHCl3), carbon tetrachloride (CCl4), bromopropane (C3H7Br) substance as a cleaning solvent.

5.2.6 The waste recycling and recycling management requirements in the production process should be established to ensure the classification and disposal of waste during the production process.

Hazardous waste included in the National Hazardous Waste List should be disposed of in a harmless manner by a qualified disposal agency.

5.3 Requirement of hazardous substances in products

Single-ended fluorescent lamps, self-ballasted fluorescent lamps for general illumination, double-ended fluorescent lamps for general illumination, high-pressure sodium lamps, metal halide lamps the mercury content should meet the requirements of Table 2.

Table 2 Mercury content limit requirements in products

Product type mercury content limit (mg/support) Single-ended fluorescent lamps and self-ballasted fluorescent lamps for general illumination Power <=30W <=1.5 Power >30; <=60W <=3.0 Double-ended fluorescent lamp for general lighting Tube diameter <=17mm <=2.5 Tube diameter >17mm <=3.0 Long-acting three-primary double-ended fluorescent lamp (lifetime greater than 25000h) <=5.0 HPS Power <=70W <=12.5 Power >70W; <=150W <=15 Power >150W; <=400W <=20 >400W <=40 Metal halide lamp Power <=70W <=10 Power >70W; <=150W <=20 Power >150W; <=250W <=30 Power >250W; <=400W <=60

5.4 Product energy requirements

5.4.1 Single-end fluorescent lamp environmental marking products The initial luminous efficacy and lumen maintenance rate should meet the requirements of GB 19415 secondary energy efficiency rating index.

The environmental performance of low-carbon products should meet the requirements of GB 19415 first-class energy efficiency rating indicators.

5.4.2 Self-ballasted fluorescent lamp environmental labeling products The initial luminous efficacy and lumen maintenance rate should meet the requirements of GB 19044 secondary energy efficiency rating index.

Environmental Labeling The energy efficiency of low carbon products should meet the requirements of GB 19044 Class 1 energy efficiency rating.

5.4.3 Double-end fluorescent lamp environmental marking products The initial luminous efficacy and lumen maintenance rate should meet the requirements of GB 19043 second-level energy efficiency rating index.

The environmental performance of low-carbon products of environmental indicators should meet the requirements of GB 19043 first-class energy efficiency rating indicators.

5.4.4 High-pressure sodium lamp environmental label and environmental label The initial light efficiency and lumen maintenance rate of low-carbon products should meet the requirements of Table 3.

Table 3 High pressure sodium lamp product requirements

Nominal power/W environmental sign environmental mark low carbon average Initial light efficiency (1m/W) 2000h Luminous maintenance rate average Initial light efficiency (1m/W) 2000h Luminous maintenance rate <=50 >=73 >=85% >=80 >=90% >50;<=70 >=81 >=85% >=90 >=90% >70;<=100 >=88 >=85% >=100 >=90% >100;<=150 >=98 >=90% >=110 >=95% >150; <=250 >=110 >=90% >=125 >=95% >250;<=400 >=120 >=90% >=135 >=95% >400;<=1000 >=130 >=85% >=143 >=90%

5.4.5 Metal halide lamp environmental label and environmental label The initial light efficiency and lumen maintenance rate of low carbon products should meet the requirements of Table 4.

Table 4 Metal halide lamp product requirements

Nominal power/W environmental sign environmental mark low carbon average Initial light efficiency (1m/W) 2000h lumen maintenance average Initial light efficiency (1m/W) 2000h lumen maintenance rate Color rendering index >= 80 <=70W >=80 >=80% >=88 >=85% >70;<=150 >=85 >=80% >=94 >=85% >150; <=250 >=85 >=85% >=94 >=90% >250;<=400 >=90 >=85% >=100 >=90% Color rendering index 150; <=250 >=88 >=85% >=95 >=90% >250;<=400 >=93 >=85% >=102 >=90%

5.4.6 Non-directional self-ballasted LED lights Environmental signs and environmental signs Low-carbon products 3000h lumen maintenance rate should be no less than 96%, color rendering index should meet the requirements of GB/T 24908 standard, the initial light effect meets the requirements of GB/T 24908 level one standard.

5.4.7 Reflective self-ballasted LED lights environmental signs and environmental signs Low carbon product color rendering index, lumen maintenance rate and initial light effect in accordance with the table 5 requirements.

Table 5 Reflective self-ballasted LED lamp product requirements

Rated color temperature model color rendering index 3000h lumen maintenance rate minimum initial light effect/(1m/W) <=4000K PAR16 PAR20 PAR30 PAR38 >=85 96% 55 >4000K;<=6500K PAR16 PAR20 PAR30 PAR38 >=80 65

5.4 Product Packaging Requirements

5.4.1 It shall be marked in accordance with the requirements of GB/T 18455.

5.4.2 Hydrochlorofluorocarbons (HCFCs) should not be used as blowing agents.

5.5 Product recycling phase requirements

A recycling and recycling management system for waste products should be established to provide information on product recycling and recycling.

5.6 Product Description Requirements

Product descriptions must be sold with the product and should include the following.

1) Relevant information on the correct recycling method after the product is discarded, such as classification with ordinary waste, can not be discarded at will, to prevent breaking Broken warning signs and emergency treatment methods after product breakage.

2) Mark the status of hazardous substances in accordance with the "Administrative Measures for Pollution Control of Electronic Information Products".

3) Information on the efficacy, color rendering index and lumen maintenance of the product.