HG/T 4868-2015Ink cartridges for digital duplicators (English PDF)
数码一体速印机用油墨盒
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4868-2015 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
July 14, 2015
Implementation date
January 1, 2016
Scope
HG/T 4868-2015 is the English-translated version of 数码一体速印机用油墨盒.
HG/T 4868-2015 is the Chinese chemical industry standard for the ink cartridges used in digital duplicators. It sets out the types and classification of the cartridges, the requirements they must meet, the test methods and inspection rules, and the marking, packaging, transport and storage.
The product covered is the cartridge fitted to a digital duplicator, the machine that prints from a thermally cut master. Sampling for inspection follows GB/T 2828.1, while GB/T 13217.3, GB/T 13217.4 and GB/T 14624.3 supply the ink test methods it uses. Issued on 14 July 2015, it has applied since 1 January 2016.
Found what you need?
Document preview — HG/T 4868-2015
National Standard of the People's Republic of China
- ICS
- 37.040.20
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection Rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 4868-2015 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 14 July 2015.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the Chinese chemical industry standard for the ink cartridges used in digital duplicators. It sets out the types and classification of the cartridges, the requirements they must meet, the test methods and inspection rules, and the marking, packaging, transport and storage. The product covered is the cartridge fitted to a digital duplicator, the machine that prints from a thermally cut master. Sampling for inspection follows GB/T 2828.1, while GB/T 13217.3, GB/T 13217.4 and GB/T 14624.3 supply the ink test methods it uses.
HG/T 4868-2015 falls under ICS 37.040.20, in the field of image technology.
This catalogue holds 84 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 2828.1-2012 — Plain bearings -- Quality characteristics -- Statistical process control (SPC)
GB/T 13217.3-2008 — Test method for fineness of grind of liquid ink
GB/T 13217.4-2008 — Test method for viscosity of liquid ink
GB/T 14624.3-2008 — Test method for fluidity of offset ink
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 40260-2021 — Test method for determining gas permeability of polymer membrane materials
GB 38508-2020 — Limits for volatile organic compounds content in cleaning agents
HG/T 3009-1999 — Photographic film and film base - Determination of thickness by mechanical scanning
HG/T 4867-2015 — Thermal masters for digital duplicators
HG/T 4866-2015 — Non-silver digital medical imaging inkjet blue film
HG/T 4865-2015 — Positive thermal computer-to-plate (CTP) plates for ultraviolet (UV) curing inks
6 Classification and status
International classification (ICS): 37.040.20
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 2828.1-2012Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- GB/T 13217.3-2008Test method for fineness of ink
- GB/T 13217.4-2008Test method for viscosity of ink
- GB/T 14624.3-2008Test method for fluidity of offset ink
Similar standards
How to Download HG/T 4868-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 13217.3-2008 — Test method for fineness of grind of liquid ink
GB/T 13217.4-2008 — Test method for viscosity of liquid ink
GB/T 14624.3-2008 — Test method for fluidity of offset ink
HG/T 4868-2015
$85.00