JB/T 8903-2013Digital stencil duplicator (English PDF)
数字式一体化速印机
This is a limited preview
Buy now to download the full PDF (16 pages)
Need quotation for your management?
Get a formal quotation for JB/T 8903-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 31, 2013
Implementation date
July 1, 2014
Scope
JB/T 8903-2013 is the English-translated version of 数字式一体化速印机.
The digital stencil duplicator is the machine covered by JB/T 8903-2013, a recommended standard of the Chinese machinery industry. It sets the technical requirements for these integrated digital duplicators and the test methods that go with them.
Inspection rules are laid down, along with the requirements for marking, packaging, transportation and storage. Among the standards it quotes are GB/T 2829-2002, GB 4943.1-2011, GB 9254, GB/T 9969-2008, GB/T 17712 and GB/T 18313-2001.
It replaces JB/T 8903-1999, and it is classified N40 in the Chinese system and 37.100.10 in the international one.
Found what you need?
Document preview — JB/T 8903-2013
National Standard of the People's Republic of China
- ICS
- 37.100.10
- Replacing
- JB/T 8903-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 8903-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 31 December 2013 and has been in force since 1 July 2014.
It replaces the earlier edition JB/T 8903-1999.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
The digital stencil duplicator is the machine covered by JB/T 8903-2013, a recommended standard of the Chinese machinery industry. It sets the technical requirements for these integrated digital duplicators and the test methods that go with them. Inspection rules are laid down, along with the requirements for marking, packaging, transportation and storage. Among the standards it quotes are GB/T 2829-2002, GB 4943.1-2011, GB 9254, GB/T 9969-2008, GB/T 17712 and GB/T 18313-2001. It replaces JB/T 8903-1999, and it is classified N40 in the Chinese system and 37.100.10 in the international one.
JB/T 8903-2013 falls under ICS 37.100.10, in the field of image technology.
This catalogue holds 169 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 191
GB/T 2829-2002 — Sampling procedures and tables for periodic inspection by attributes (apply to inspection of process stability)
GB 4943.1-2011 — [Replaced by GB 4943.1-2022] Information technology equipment - Safety - Part 1: General requirements
GB 9254
GB/T 9851
GB/T 9969-2008 — General principles for preparation of instructions for use of industrial products
GB/T 13384
GB/T 14436
GB 17625.1
GB/T 17712
GB/T 18313-2001 — Acoustics -- Measurement of airborne noise emitted by information technology and telecommunications equipment
JB/T 6872
JB/T 7475
JB/T 8274
JB/T 9444.1
JB/T 9444.2
JB/T 9444.3
JB/T 9444.4
JB/T 9444.5
JB/T 9444.6
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 16 pages
5 Related standards
Other editions:
JB/T 8903-1999 (earlier edition)
Standards on related subjects:
DY/T 8-2023 — Technical requirements and measurement methods for digital cinema LEDauditorium
JB/T 9448-2015 — Technical requirements for silicone rubber fusing pressure rollers of electrostatic copiers
JB/T 9445-2015 — Technical requirements for discharge brushes of electrostatic copiers
JB/T 10940-2010 — Specification for dry single-component non-magnetic developers for laser printers
6 Classification and status
International classification (ICS): 37.100.10
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 16 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 2829-2002Sampling procedures and tables for periodic inspection by attributes
- GB 4943.1-2011Audio/video,information and communication technology equipment—Part 1: Safety requirements
- GB 9254Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement
- GB/T 9969-2008General principles for preparation of instructions for use of industrial products
- GB/T 13384General specifications for packing of mechanical and electrical product
GB/T 9851
Similar standards
Editions of JB/T 8903
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 8903-2013 | Digital stencil duplicator | current edition | Current |
| JB/T 8903-1999 | Digital stencil duplicator | previous edition | Superseded |
This page sells the current edition, JB/T 8903-2013. Earlier editions are listed for reference only.
How to Download JB/T 8903-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 17625.1-1998 — The limits for the harmonic current emissions caused by low-voltage electrical and electronic equipments (equpment input current≤16 A per phase)
GB 17625.1-2003 — [Replaced by GB 17625.1-2012] Electromagnetic compatibility limits - Limits for harmonic current emissions (equipment input current 16 A per phase)
GB 17625.1-2012 — Electromagnetic compatibility - Limits - Limits for harmonic current emissions (equipment input current 16 A per phase)
JB/T 8903-2013
$285.00