HG/T 4867-2015Thermal masters for digital duplicators (English PDF)
数码一体速印机用热敏版纸
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4867-2015 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
July 14, 2015
Implementation date
January 1, 2016
Scope
HG/T 4867-2015 is the English-translated version of 数码一体速印机用热敏版纸.
HG/T 4867-2015 is the Chinese chemical industry standard for thermal masters used in digital duplicators. It defines the models and the composition of the master and then sets the requirements, the test methods, the inspection rules and the provisions on marking, packaging, transport and storage.
The product is the thermal stencil paper that a digital duplicator cuts with a thermal head before printing. Inspection sampling follows GB/T 2828.1, and the paper properties are measured by the methods of GB/T 451.3, GB/T 10006, GB/T 12914 and GB/T 22896. Issued on 14 July 2015, it has applied since 1 January 2016.
Found what you need?
Document preview — HG/T 4867-2015
National Standard of the People's Republic of China
- ICS
- 37.040.20
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection Rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 4867-2015 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 14 July 2015.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the Chinese chemical industry standard for thermal masters used in digital duplicators. It defines the models and the composition of the master and then sets the requirements, the test methods, the inspection rules and the provisions on marking, packaging, transport and storage. The product is the thermal stencil paper that a digital duplicator cuts with a thermal head before printing. Inspection sampling follows GB/T 2828.1, and the paper properties are measured by the methods of GB/T 451.3, GB/T 10006, GB/T 12914 and GB/T 22896.
HG/T 4867-2015 falls under ICS 37.040.20, in the field of image technology.
This catalogue holds 84 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 451.3-2002 — Paper and board -- Determination of thickness
GB/T 2828.1-2012 — Plain bearings -- Quality characteristics -- Statistical process control (SPC)
GB/T 10006-1988 — Plastics. Film and sheeting. Determination of the coefficients of friction
GB/T 12914-2008 — Paper and board - Determination of tensile properties
GB/T 22896-2008 — Paper and board -- Determination of curl -- Single vertically suspended test piece
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 40260-2021 — Test method for determining gas permeability of polymer membrane materials
GB 38508-2020 — Limits for volatile organic compounds content in cleaning agents
HG/T 3009-1999 — Photographic film and film base - Determination of thickness by mechanical scanning
HG/T 4868-2015 — Ink cartridges for digital duplicators
HG/T 4866-2015 — Non-silver digital medical imaging inkjet blue film
HG/T 4865-2015 — Positive thermal computer-to-plate (CTP) plates for ultraviolet (UV) curing inks
6 Classification and status
International classification (ICS): 37.040.20
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 451.3-2002Paper and board - Part 3: Determination of thickness
- GB/T 2828.1-2012Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- GB/T 10006-1988Plastics - Film and sheeting - Determination of the coefficients of friction
- GB/T 12914-2008Paper and board -- Determination of tensile properties -- Constant rate of elongation method (20mm/min)
- GB/T 22896-2008Paper and board -- Determination of curl -- Single vertically suspended test piece
Similar standards
How to Download HG/T 4867-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10006-1988 — Plastics. Film and sheeting. Determination of the coefficients of friction
GB/T 12914-2008 — Paper and board - Determination of tensile properties
GB/T 22896-2008 — Paper and board -- Determination of curl -- Single vertically suspended test piece
HG/T 4867-2015
$85.00