Valid

HG/T 4862-2015Test methods for reaction performance of methanol-to-light-olefins catalysts (English PDF)

甲醇制低碳烯烃催化剂反应性能试验方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 4862-2015 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

July 14, 2015

Implementation date

January 1, 2016

Scope

HG/T 4862-2015 is the English-translated version of 甲醇制低碳烯烃催化剂反应性能试验方法.

HG/T 4862-2015 is the Chinese chemical industry standard laying down the test methods for the reaction performance of catalysts for the conversion of methanol to light olefins.

It sets out how the performance of such a catalyst in the reaction is measured and reported. The methods are written for the solid catalysts employed in the methanol to olefins process, in which ethylene and propylene are obtained from methanol.

Particle sizing follows GB/T 6003.1 and sampling follows GB/T 6679, the two standards it quotes. Issued on 14 July 2015, it has applied since 1 January 2016.

Found what you need?

Document preview — HG/T 4862-2015

National Standard of the People's Republic of China

ICS
71.100.99

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Molecular formula and relative molecular mass
  • 5 Classification
  • 6 Test methods
  • 6.1 General provisions
  • 6.2 Appearance inspection
  • 7 Inspection rules
  • 9 Marking and accompanying documents

1 Foreword

HG/T 4862-2015 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 14 July 2015.

The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

This standard is the Chinese chemical industry standard laying down the test methods for the reaction performance of catalysts for the conversion of methanol to light olefins. It sets out how the performance of such a catalyst in the reaction is measured and reported. The methods are written for the solid catalysts employed in the methanol to olefins process, in which ethylene and propylene are obtained from methanol. Particle sizing follows GB/T 6003.1 and sampling follows GB/T 6679, the two standards it quotes.

HG/T 4862-2015 falls under ICS 71.100.99, in the field of chemical technology.

This catalogue holds 1,628 other HG/T standards in that field.

In this catalogue, HG/T standards carry edition years from 1975 to 2026.

3 Normative references

GB/T 6003.1

GB/T 6679

4 Where this standard sits

It cites 2 standards, listed in full above.

One other standard in this catalogue cites it: HG/T 4860-2015.

5 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

6 Related standards

Standards on related subjects:

GB/T 37354-2019 — Analytical method of chemical composition for activated carbon mercury removal catalyst

GB/T 34248-2017 — Performance test method of three-way catalyst

HG/T 2976-2011 — Fertilizer catalysts - Determination of attrition rate

HG/T 4856-2015 — Nickel-based catalysts for gas-phase benzene hydrogenation - Analytical methods for chemical composition

HG/T 4855-2015 — Catalysts for dehydrogenation of cyclohexanol to cyclohexanone - Test method for activity

HG/T 4854-2015 — Ambient-temperature iron oxide desulfurizers - Analytical methods for chemical composition

7 Classification and status

International classification (ICS): 71.100.99

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download HG/T 4862-2015

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 4862-2015

$195.00