NB/T 10518-2021Determination of 17 oxygenated compounds in methanol to olefins (MTO) water—Gas chromatographic method (English PDF)
甲醇制烯烃(MTO)水中十七种氧化合物的测定 气相色谱法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for NB/T 10518-2021 in 30 minutes.
Issued by
NEA
Level / Type
Industry · Recommended
Issue date
January 7, 2021
Implementation date
April 1, 2021
Scope
NB/T 10518-2021 is the English-translated version of 甲醇制烯烃(MTO)水中十七种氧化合物的测定 气相色谱法.
NB/T 10518-2021 is a gas chromatographic method for measuring seventeen oxygenated compounds in the water streams of methanol-to-olefins (MTO) plants.
The analytes are methanol, ethanol, 1-propanol, isopropanol, 1-butanol, 2-butanol, 1-pentanol, 1-hexanol, acetaldehyde, propionaldehyde, butyraldehyde, acetone, 2-butanone, 2-pentanone, 2-hexanone, acetic acid and propionic acid.
The sample is vaporised and split, separated on a chromatographic column and detected with a hydrogen flame ionization detector, with peaks identified by retention time and quantified by the external standard method.
The document lists the gases, reagents and instruments required and applies to washing water and purified water from the MTO process. Issued on 7 January 2021, it has applied since 1 April 2021.
Found what you need?
Document preview — NB/T 10518-2021
National Standard of the People's Republic of China
- Classification
- D 51
Issued by: National Energy Administration of the People's Republic of China
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Principles of the method
- 4 Reagents and materials
- 5 Apparatus and equipment
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
1 Scope
This standard specifies the use of gas chromatography to determine methanol, ethanol, 1-propanol, isopropanol, 1-butanol, 2-butanol in the water phase of the methanol-to-olefin process.
Alcohol, 1-pentanol, 1-hexanol, acetaldehyde, propionaldehyde, butyraldehyde, acetone, 2-butanone, 2-pentanone, 2-hexanone, acetic acid, propionic acid and seventeen oxygen-containing compounds method.
This standard applies to washing water and purified water methanol, ethanol, 1-propanol, isopropanol, 1-butanol, 2-butanol, 1-pentanol in the process of methanol to olefins.
Determination of seventeen oxygen-containing compounds of alcohol, 1-hexanol, acetaldehyde, propionaldehyde, butyraldehyde, acetone, 2-butanone, 2-pentanone, 2-hexanone, acetic acid, and propionic acid.
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this document. For undated reference documents, the latest version (including all amendments) is applicable to this document.
GB/T 6682 Analytical laboratory water specifications and test methods
GB/T 8170 Numerical rounding rules and the expression and determination of limit values
3 Principles of the method
Gas chromatograph is used to analyze and determine oxygen-containing compounds in methanol to olefins water. The water sample to be analyzed is vaporized and split by the chromatograph.
Then, the carrier gas is carried into the chromatographic column, and the oxygen-containing compounds in the water sample to be analyzed are separated through the chromatographic column, and the signal is detected by a hydrogen flame ionization detector.
For detection, the components to be tested in methanol-to-olefins water were qualitatively analyzed according to the retention time of the chromatographic peak, and the external standard method was used for quantification.
4 Reagents and materials
4.1 Gas
4.1.2 High purity hydrogen. the purity is greater than 99.999%
4.1.3 Zero air. The oxygen content is 19.9%~21.9%
4.1.1 High-purity nitrogen. the purity is greater than 99.999%
4.2 Reagents
4.2.1 Methanol, ethanol, 1-propanol, isopropanol, 1-butanol, 2-butanol, 1-pentanol, 1-hexanol, acetaldehyde, propionaldehyde, butyraldehyde, acetone, 2-butanol Ketone, 2-Pentane
Ketone, 2-hexanone, acetic acid, propionic acid, tetrahydrofuran. The purity of the reagents used should be analytical grade or above.
4.2.2 The experimental water complies with the water requirements of GB/T 6682.
5 Apparatus and equipment
5.1 Gas chromatograph
5.1.1 The gas chromatograph is equipped with a hydrogen flame ionization detector, equipped with automatic or manual sampling device, it is recommended to use automatic sampling device.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download NB/T 10518-2021
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 6682-1992 — Water for analytical laboratory use--Specification and test methods
GB/T 6682-2008 — Water for analytical laboratory use - Specification and test methods
GB/T 8170-1987 — Rules for rounding off of numerical values
NB/T 10518-2021
$135.00