HG/T 4669-2014High impact polystyrene (PS-HI) colour masterbatches (English PDF)
高抗冲聚苯乙烯(PS-HI)色母料
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4669-2014 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
October 14, 2014
Implementation date
April 1, 2015
Scope
HG/T 4669-2014 is the English-translated version of 高抗冲聚苯乙烯(PS-HI)色母料.
HG/T 4669-2014 is the recommended chemical industry standard for high impact polystyrene colour masterbatches, written as PS-HI masterbatches. It states the requirements for the masterbatch together with the test methods, the inspection rules and the rules for signs, packaging, transport and storage.
It applies to masterbatches whose base material is PS-HI resin, that is, colour concentrates meant for use with the same polymer. Mechanical and thermal characterisation draws on GB/T 1040.2, GB/T 1843, GB/T 17037.1 and SH/T 1541, moisture on GB/T 6284, and restricted substances on GB/T 26125 and GB/T 26572. Issued on 14 October 2014, it has applied since 1 April 2015.
Found what you need?
Document preview — HG/T 4669-2014
National Standard of the People's Republic of China
- ICS
- 83.080.20
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and definitions
- 3.1 Category A
- 3.2 Category B
- 4 Classification and designation
- 4.1 General
- 4.2 Character group 1
- 4.3 Character group 2
- 4.4 Character group 3
- 4.5 Character group 4
- 4.6 Designation example
- 5 Test Methods
- 5.1 Appearance requirements
- 5.2 Technical requirements
- 5.3 Environmental requirements
- 6.1 Test conditions
- 6.2 Test substrate
- 6.3 Apparatus
- 6.4 Appearance
- 6.5 Coating property
- 6.6 Shear elongation
- 6.7 Tensile shear strength
- 6.8 Tensile bond strength
- 6.9 Free formaldehyde
- 7 Inspection rules
- 7.1 Inspection
- 7.2 Batching
- 7.3 Sampling
- 7.4 Judgment of inspection results
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
- 8.3 Transportation
- 8.4 Storage
- 9 Packaging, transportation and storage
1 Foreword
HG/T 4669-2014 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 14 October 2014 and has been in force since 1 April 2015.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the recommended chemical industry standard for high impact polystyrene colour masterbatches, written as PS-HI masterbatches. It states the requirements for the masterbatch together with the test methods, the inspection rules and the rules for signs, packaging, transport and storage. It applies to masterbatches whose base material is PS-HI resin, that is, colour concentrates meant for use with the same polymer. Mechanical and thermal characterisation draws on GB/T 1040.2, GB/T 1843, GB/T 17037.1 and SH/T 1541, moisture on GB/T 6284, and restricted substances on GB/T 26125 and GB/T 26572.
HG/T 4669-2014 falls under ICS 83.080.20, in the field of rubber and plastics industries.
This catalogue holds 313 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 1040.2
GB/T 1843
GB/T 6284
GB/T 17037.1
GB/T 26125
GB/T 26572
SH/T 1541
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
QB/T 4878-2015 — Expanded polypropylene for moulding
GB/T 4615-2013 — Poly (vinyl chloride) -- Determination of residual vinyl chloride monomer -- Gas-chromatographic method
HG/T 2624-1994 — Microporous Styrene Type Weak Basic Anion Exchange Resin D 301-FC
HG/T 6493-2026 — Poly (vinylidene fluoride)(PVDF) resins for lithium-ion batteries
HG/T 6492-2026 — Plastics - Silver-zinc antibacterial masterbatch for polyolefin
HG/T 4668-2014 — Polypropylene(PP)color masterbatch
6 Classification and status
International classification (ICS): 83.080.20
Chinese Standard Classification (CCS): G 32
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 1040.2Plastics – Determination of Tensile Properties – Part 2: Test Conditions for Moulding and Extrusion Plastics
- GB/T 1843Plastics - Determination of izod impact strength
- GB/T 6284Chemical products for industrial use - General method for determination of water content - The loss of mass on drying method
- GB/T 17037.1Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 1: General principles, and moulding of multipurpose and bar test specimens
- GB/T 26125Electrical and electronic products -- Determination of six regulated substances (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers)
- GB/T 26572Requirements of concentration limits for certain restricted substances in electrical and electronic products
Similar standards
How to Download HG/T 4669-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1040.2-2006 — Plastic - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastic
GB/T 1040.2-2022 — Plastics – Determination of Tensile Properties – Part 2: Test Conditions for Moulding and Extrusion Plastics
GB/T 17037.1-1997 — Injection moulding of test specimens of thermoplastic materails. Part 1: General principles and moulding of multipurpose and bar test specimens
HG/T 4669-2014
$40.00