Valid

HG/T 4561-2013Unsaturated polyester putty (English PDF)

不饱和聚酯腻子

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 4561-2013 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

October 17, 2013

Implementation date

March 1, 2014

Scope

HG/T 4561-2013 is the English-translated version of 不饱和聚酯腻子.

HG/T 4561-2013 is a recommended chemical industry standard of China dealing with unsaturated polyester putty, the filler commonly known simply as putty. It sets the product grades and their requirements and gives the test methods, the inspection rules and the rules on marking, packaging and storage.

The products in scope are two-component putties made up of a base component and a hardener. Its checks refer to quoted standards including GB/T 1727-1992, GB/T 1732-1993, GB/T 1735, GB/T 5210-2006, GB/T 9258.1-2000 and GB/T 9271-2008.

The Ministry of Industry and Information Technology issued the document, which carries Chinese classification G51 and international classification 87.040. Issued on 17 October 2013, it has applied since 1 March 2014.

Found what you need?

Document preview — HG/T 4561-2013

National Standard of the People's Republic of China

ICS
87.040

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative References
  • 3 Terms and definitions
  • 4 Molecular formula and relative molecular mass
  • 5 Classification
  • 6 Test methods
  • 6.1 General provisions
  • 6.2 Appearance inspection
  • 7 Inspection Rules
  • 9 Marking and accompanying documents

1 Foreword

HG/T 4561-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 17 October 2013 and has been in force since 1 March 2014.

The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

This standard is a recommended chemical industry standard of China dealing with unsaturated polyester putty, the filler commonly known simply as putty. It sets the product grades and their requirements and gives the test methods, the inspection rules and the rules on marking, packaging and storage. The products in scope are two-component putties made up of a base component and a hardener. Its checks refer to quoted standards including GB/T 1727-1992, GB/T 1732-1993, GB/T 1735, GB/T 5210-2006, GB/T 9258.1-2000 and GB/T 9271-2008. The Ministry of Industry and Information Technology issued the document, which carries Chinese classification G51 and international classification 87.040.

HG/T 4561-2013 falls under ICS 87.040, in the field of paint and colour industries.

This catalogue holds 140 other HG/T standards in that field.

In this catalogue, HG/T standards carry edition years from 1975 to 2026.

3 Normative references

GB/T 1727-1992 — General preparation of paint film

GB/T 1728-1979 — Methods of test for drying time of coatings of paints and putties

GB/T 1732-1993 — Determination of impact resistance of film

GB/T 1735

GB/T 1748-1979 — Method of test for flexibility of putty coatings

GB/T 1749-1979 — Method of test for consistency of pastes and putties

GB/T 1766

GB/T 3186

GB/T 5210-2006 — Paints and varnishes -- Pull-off test for adhesion

GB/T 8170

GB/T 9258.1-2000 — Coated abrasives. Grain size analysis. Part 1: Grain size distribution test

GB/T 9271-2008 — Paints and varnishes standard panels for testing

GB/T 9278

GB/T 9750

GB/T 13491

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Standards on related subjects:

HG/T 5060-2016 — Anticorrosive coatings for liquefied natural gas (LNG) storage tanks

GB/T 3186-2006 — Paints, varnishes and raw materials for paints and varnishes -- Sampling

GB/T 5210-2006 — Paints and varnishes -- Pull-off test for adhesion

HG/T 4563-2025 — Non-stick coatings

HG/T 4564-2013 — Surface-tolerant epoxy coatings for low surface preparation

HG/T 4562-2013 — Irreversible temperature-indicating coatings

6 Classification and status

International classification (ICS): 87.040

Chinese Standard Classification (CCS): G 51

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download HG/T 4561-2013

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 4561-2013

$85.00