HG/T 4550.2-2013Determination of cadmium in waste chemicals - Part 2: Flame atomic absorption spectrophotometry (English PDF)
废弃化学品中镉的测定 第2部分:火焰原子吸收分光光度法
This is a limited preview
Buy now to download the full PDF (31 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4550.2-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
October 17, 2013
Implementation date
March 1, 2014
Scope
HG/T 4550.2-2013 is the English-translated version of 废弃化学品中镉的测定 第2部分:火焰原子吸收分光光度法.
Part 2 of the HG/T 4550 series, HG/T 4550.2-2013 is a recommended chemical industry standard of China covering the determination of cadmium in waste chemicals by flame atomic absorption spectrophotometry.
It explains the principle of the technique and then the reagents and materials, the instruments and equipment, the handling of the sample, the steps of the analysis and the calculation of results.
The method is intended for laboratories measuring the cadmium content of discarded chemical products, where the flame technique suits the higher concentration range.
GB/T 6682-2008, HG/T 3696.2 and HG/T 3696.3 are cited. Issued on 17 October 2013, it has applied since 1 March 2014.
Found what you need?
Document preview — HG/T 4550.2-2013
National Standard of the People's Republic of China
- ICS
- 13.030.01
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection Rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 4550.2-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 17 October 2013 and has been in force since 1 March 2014.
It is one of 5 parts of the HG/T 4550 series.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
Part 2 of the HG/T 4550 series, HG/T 4550.2-2013 is a recommended chemical industry standard of China covering the determination of cadmium in waste chemicals by flame atomic absorption spectrophotometry. It explains the principle of the technique and then the reagents and materials, the instruments and equipment, the handling of the sample, the steps of the analysis and the calculation of results. The method is intended for laboratories measuring the cadmium content of discarded chemical products, where the flame technique suits the higher concentration range. GB/T 6682-2008, HG/T 3696.2 and HG/T 3696.3 are cited.
HG/T 4550.2-2013 falls under ICS 13.030.01, in the field of environment and health protection, safety.
This catalogue holds 95 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 6682-2008 — Water for analytical laboratory use - Specification and test methods
HG/T 3696.2
HG/T 3696.3
4 Where this standard sits
It cites 3 standards, among them GB/T 6682-2008, listed in full above.
It is one part of the HG/T 4550 series, of which this catalogue holds 5 parts.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 31 pages
6 Related standards
Other parts of this standard:
HG/T 4550.1-2013 — Part 1: Graphite furnace atomic absorption spectrophotometry
HG/T 4550.3-2013 — Part 3: Cadion spectrophotometric method
HG/T 4550.4-2013 — Part 4: Atomic fluorescence spectrometry
HG/T 4550.5-2013 — Part 5: Inductively coupled plasma atomic emission spectrometry
Standards on related subjects:
GB/T 17145-2024 — Guidelines for recycling of used mineral oil
HG/T 5871-2021 — Technical specification for green-design product assessment - Polyethylene terephthalate (PET) resin
HJ/T 331-2006 — Specifications for environmental protection product. Catalytic converters for petrol vehicles
7 Classification and status
International classification (ICS): 13.030.01
Chinese Standard Classification (CCS): Z 04
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 31 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 6682-2008Water for analytical laboratory use - Specification and test methods
- HG/T 3696.2Inorganic chemical products - Preparation of standard solutions, reagent solutions and products for chemical analysis - Part 2: Preparation of impurity standard solutions
- HG/T 3696.3Inorganic chemical products - Preparation of standard solutions, reagent solutions and products for chemical analysis - Part 3: Preparation of reagent solutions and products
Similar standards
How to Download HG/T 4550.2-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 6682-2008 — Water for analytical laboratory use - Specification and test methods
HG/T 3696.2-2002 — Inorganic chemical products Preparations of standard solutions for chemical analysis
HG/T 3696.2-2011 — Inorganic chemical products - Preparation of standard solutions, reagent solutions and products for chemical analysis - Part 2: Preparation of impurity standard solutions
HG/T 4550.2-2013
$185.00