HG/T 4395-2012Blend polyols for rigid polyurethane foams used in solar water heaters (English PDF)
太阳能热水器用聚氨酯硬泡组合聚醚
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4395-2012 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 28, 2012
Implementation date
June 1, 2013
Scope
HG/T 4395-2012 is the English-translated version of 太阳能热水器用聚氨酯硬泡组合聚醚.
HG/T 4395-2012 is the Chinese chemical industry standard for the blend polyols from which rigid polyurethane foam is made for solar water heaters. It classifies the combined polyether product and sets its technical requirements, then the test methods, inspection rules, signs, packaging, transport and storage.
Its application is to the polyurethane foam systems of solar water heating equipment, which is why it is classified 83.100 internationally and G30 in the Chinese scheme.
A wide group of test standards is cited with it, including GB/T 611, GB/T 2918, GB/T 6343, GB/T 6678, GB/T 12008.2, GB/T 12008.3, GB/T 12008.7, GB/T 22313 and GB/T 26709. Issued on 28 December 2012, it has applied since 1 June 2013.
Found what you need?
Document preview — HG/T 4395-2012
National Standard of the People's Republic of China
- ICS
- 83.100
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and definitions
- 3.1 Category A
- 3.2 Category B
- 4 Classification and designation
- 4.1 General
- 4.2 Character group 1
- 4.3 Character group 2
- 4.4 Character group 3
- 4.5 Character group 4
- 4.6 Designation example
- 5 Test Methods
- 5.1 Appearance requirements
- 5.2 Technical requirements
- 5.3 Environmental requirements
- 6.1 Test conditions
- 6.2 Test substrate
- 6.3 Apparatus
- 6.4 Appearance
- 6.5 Coating property
- 6.6 Shear elongation
- 6.7 Tensile shear strength
- 6.8 Tensile bond strength
- 6.9 Free formaldehyde
- 7 Inspection rules
- 7.1 Inspection
- 7.2 Batching
- 7.3 Sampling
- 7.4 Judgment of inspection results
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
- 8.3 Transportation
- 8.4 Storage
- 9 Packaging, transportation and storage
1 Foreword
HG/T 4395-2012 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 28 December 2012 and has been in force since 1 June 2013.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the Chinese chemical industry standard for the blend polyols from which rigid polyurethane foam is made for solar water heaters. It classifies the combined polyether product and sets its technical requirements, then the test methods, inspection rules, signs, packaging, transport and storage. Its application is to the polyurethane foam systems of solar water heating equipment, which is why it is classified 83.100 internationally and G30 in the Chinese scheme. A wide group of test standards is cited with it, including GB/T 611, GB/T 2918, GB/T 6343, GB/T 6678, GB/T 12008.2, GB/T 12008.3, GB/T 12008.7, GB/T 22313 and GB/T 26709.
HG/T 4395-2012 falls under ICS 83.100, in the field of rubber and plastics industries.
This catalogue holds 313 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 611-2006 — Chemical reagent - General method for the determination of density
GB/T 2918-1998 — Plastics. Standard atmospheres for conditioning and testing
GB/T 6343-2009 — Cellular plastics and rubbers - Determination of apparent density
GB/T 6678-2003 — General principles for sampling chemical products
GB/T 6680-2003 — General rules for sampling liquid chemical products
GB/T 12008.2-2010 — Plastics - Polyether polyols - Part 2: Specification
GB/T 12008.3-2009 — Plastics -- Polyether polyols -- Part 3: Determination of hydroxyl number
GB/T 12008.7-2010 — Plastics-Polyether polyols-Part 7:Determination of viscosity
GB/T 22313-2008 — Plastics -- Polyols for use in the production of polyurethan -- Determination of water content
GB/T 26709-2011 — Rigid polyurethane foam for solar water heaters
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 24370-2021 — Nanotechnologies - Characterization of cadmium chalcogenide colloidal quantum dot - UV-Vis absorption spectroscopy
HG/T 3660-1999 — Testing methods for melt viscosity of hot-melt adhesives
HG/T 2624-1994 — Microporous Styrene Type Weak Basic Anion Exchange Resin D 301-FC
HG/T 6536-2026 — Plastics - Polyolefin-base single pigment concentrate
HG/T 6395-2025 — Determination of volatile methylcyclosiloxane content in silicone oil
6 Classification and status
International classification (ICS): 83.100
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 611-2006Chemical reagent - General method for the determination of density
- GB/T 2918-1998Plastics -- Standard atmospheres for conditioning and testing
- GB/T 6343-2009Cellular plastics and rubbers - Determination of apparent density
- GB/T 6678-2003General principles for sampling chemical products
- GB/T 6680-2003General rules for sampling liquid chemical products
- GB/T 12008.2-2010Plastics - Polyether polyols - Part 2: Specification
Similar standards
How to Download HG/T 4395-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 12008.2-2010 — Plastics - Polyether polyols - Part 2: Specification
GB/T 12008.3-2009 — Plastics -- Polyether polyols -- Part 3: Determination of hydroxyl number
GB/T 12008.7-2010 — Plastics-Polyether polyols-Part 7:Determination of viscosity
HG/T 4395-2012
$105.00