GB/T 30916-2014Blend polyol for rigid polyurethane foam used in spraying (English PDF)
喷涂硬质聚氨酯泡沫组合聚醚
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 30916-2014 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 8, 2014
Implementation date
December 1, 2014
Scope
GB/T 30916-2014 is the English-translated version of 喷涂硬质聚氨酯泡沫组合聚醚.
GB/T 30916-2014 is the Chinese standard "Blend polyol for rigid polyurethane foam used in spraying".
Its scope clause reads: This standard specifies the spray rigid polyurethane foam combined polyether (hereinafter referred to as polyether) classification, technical requirements, test methods, inspection Inspection rules and signs, packaging, transportation and storage.
This standard applies to (add or construction site) from a polyol, foam stabilizers, catalysts, flame retardants and other additives in a predetermined process Formulated under the conditions from the combination of polyether. Its clauses include requirements.
Found what you need?
Document preview — GB/T 30916-2014
National Standard of the People's Republic of China
- ICS
- 83.040
- Classification
- G 32
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 4 Requirements
- 4.1 Appearance
- 4.2 Physical and Chemical Properties
1 Scope
This standard specifies the spray rigid polyurethane foam combined polyether (hereinafter referred to as polyether) classification, technical requirements, test methods, inspection
Inspection rules and signs, packaging, transportation and storage.
This standard applies to (add or construction site) from a polyol, foam stabilizers, catalysts, flame retardants and other additives in a predetermined process
Formulated under the conditions from the combination of polyether.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 611 chemical reagent - General method for determining the density
GB/T 2918 plastic sample conditioning and testing of the standard environment
GB/T 6343 and foam rubber Determination of apparent density
GB/T 6678 General Principles for Sampling Chemical Products
GB/T 6680 General rules for sampling liquid chemical products
GB/T 12008.2-2010 plastic polyether polyols - Part 2. Specifications
Determination of hydroxyl value. GB/T 12008.3 plastic polyether polyol Part 3
Part of GB/T 12008.7 plastic polyether polyols 7. Determination of viscosity
Determination of GB/T 22313 plastic for the production of polyurethane polyols water content
Category 3
Polyether according to different purposes into the architectural and the other two categories.
a) in accordance with applicable architectural spaces divided into.
1) wall of foam type I;
2) roofing foam type II, wherein the means for non-accessible roof foam for II-A, Master roof foam for II-B, waterproof insulation
One foam for II-C.
b) Other.
Mainly used for cold storage insulation, tank insulation, pipe insulation and so on.
4 Requirements
4.1 Appearance
Polyether homogeneous viscous liquid.
4.2 Physical and Chemical Properties
Polyether physical and chemical properties shall comply with the requirements of Table 1.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 30916-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 30916-2014
$145.00