Valid

HG/T 4382-2012Rubber stators for screw drilling tools (English PDF)

螺杆钻具橡胶定子

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 4382-2012 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

December 28, 2012

Implementation date

June 1, 2013

Scope

HG/T 4382-2012 is the English-translated version of 螺杆钻具橡胶定子.

HG/T 4382-2012 is the chemical industry standard of China for the rubber stators of screw drilling tools. It fixes the terms and definitions, the structure of the product, the requirements, the test methods and the inspection rules, together with marking, packaging, transport and storage.

It applies to the stators used in oil drilling, in workover operations and in comparable special operations. The standard belongs to the recommended series and is classified G47 in China and ICS 83.140.99.

It draws its methods from GB/T 528, GB/T 529, GB/T 531.1, GB/T 1689, GB/T 1690, GB/T 3512, GB/T 3672.1-2002, GB/T 15254 and HG/T 3090-1987. Issued on 28 December 2012, it has applied since 1 June 2013.

Found what you need?

Document preview — HG/T 4382-2012

National Standard of the People's Republic of China

ICS
83.140.99

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative References
  • 3 Terms and definitions
  • 3.1 Category A
  • 3.2 Category B
  • 4 Classification and designation
  • 4.1 General
  • 4.2 Character group 1
  • 4.3 Character group 2
  • 4.4 Character group 3
  • 4.5 Character group 4
  • 4.6 Designation example
  • 5 Test Methods
  • 5.1 Appearance requirements
  • 5.2 Technical requirements
  • 5.3 Environmental requirements
  • 6.1 Test conditions
  • 6.2 Test substrate
  • 6.3 Apparatus
  • 6.4 Appearance
  • 6.5 Coating property
  • 6.6 Shear elongation
  • 6.7 Tensile shear strength
  • 6.8 Tensile bond strength
  • 6.9 Free formaldehyde
  • 7 Inspection rules
  • 7.1 Inspection
  • 7.2 Batching
  • 7.3 Sampling
  • 7.4 Judgment of inspection results
  • 8 Marking, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 Packaging
  • 8.3 Transportation
  • 8.4 Storage
  • 9 Packaging, transportation and storage

1 Foreword

HG/T 4382-2012 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 28 December 2012 and has been in force since 1 June 2013.

The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

This standard is the chemical industry standard of China for the rubber stators of screw drilling tools. It fixes the terms and definitions, the structure of the product, the requirements, the test methods and the inspection rules, together with marking, packaging, transport and storage. It applies to the stators used in oil drilling, in workover operations and in comparable special operations. The standard belongs to the recommended series and is classified G47 in China and ICS 83.140.99. It draws its methods from GB/T 528, GB/T 529, GB/T 531.1, GB/T 1689, GB/T 1690, GB/T 3512, GB/T 3672.1-2002, GB/T 15254 and HG/T 3090-1987.

HG/T 4382-2012 falls under ICS 83.140.99, in the field of rubber and plastics industries.

This catalogue holds 313 other HG/T standards in that field.

In this catalogue, HG/T standards carry edition years from 1975 to 2026.

3 Normative references

GB/T 528

GB/T 529

GB/T 531.1

GB/T 1689

GB/T 1690

GB/T 3512

GB/T 3672.1-2002 — Rubber - Tolerances of products - Part 1: Dimensional tolerances

GB/T 15254

HG/T 3090-1987 (2009)

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Standards on related subjects:

GB/T 14833-2020 — Synthetic materials sports field surfaces

HG/T 4070-2008 — Silicone rubber sheets

GB/T 5574-2008 — Industrial rubber sheet

HG/T 4384-2012 — Damping rubber sheets for automobiles

HG/T 4383-2012 — Sound-absorbing cones

HG/T 4381-2012 — Vacuum bags for glass thermal laminating machines

6 Classification and status

International classification (ICS): 83.140.99

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download HG/T 4382-2012

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 4382-2012

$115.00