Valid

HG/T 3230-2009Rubber single-screw extruders - Test methods (English PDF)

橡胶单螺杆挤出机检测方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 3230-2009 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

December 4, 2009

Implementation date

June 1, 2010

Scope

HG/T 3230-2009 is the English-translated version of 橡胶单螺杆挤出机检测方法.

HG/T 3230-2009 is a recommended chemical industry standard of China giving the testing and measuring methods for rubber single-screw extruders. It describes the detection method for the main test items of the machine and applies to the testing of rubber single-screw extruders.

It is meant to be used together with HG/T 3110-2009, and HG/T 2108 is quoted in its text. Cold feed pin extruders for rubber lie outside its scope. It replaces HG/T 3230-1989. Issued on 4 December 2009, it has applied since 1 June 2010.

Found what you need?

Document preview — HG/T 3230-2009

National Standard of the People's Republic of China

ICS
71.120
Replacing
HG/T 3230-1989

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Molecular formula and relative molecular mass
  • 5 Classification
  • 6 Test methods
  • 6.1 General provisions
  • 6.2 Appearance inspection
  • 7 Inspection rules
  • 9 Marking and accompanying documents

1 Foreword

HG/T 3230-2009 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 4 December 2009 and has been in force since 1 June 2010.

It replaces the earlier edition HG/T 3230-1989.

The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard is a recommended chemical industry standard of China giving the testing and measuring methods for rubber single-screw extruders. It describes the detection method for the main test items of the machine and applies to the testing of rubber single-screw extruders. It is meant to be used together with HG/T 3110-2009, and HG/T 2108 is quoted in its text. Cold feed pin extruders for rubber lie outside its scope. It replaces HG/T 3230-1989.

HG/T 3230-2009 falls under ICS 71.120, in the field of chemical technology.

This catalogue holds 1,628 other HG/T standards in that field.

In this catalogue, HG/T standards carry edition years from 1975 to 2026.

3 Normative references

HG/T 2108

4 Where this standard sits

It cites one other standard, HG/T 2108, listed in full above.

One other standard in this catalogue cites it: HG/T 3110-2009.

5 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

6 Related standards

Other editions:

HG/T 3230-1989 (earlier edition)

Standards on related subjects:

GB/T 25156-2020 — General specifications and inspection methods of rubber and plastics injection moulding machines

JB/T 8539-2013 — Plastic Extrusion Blow Molding Machines

GB 20055-2006 — Safety requirements of mill for rubber and plastics

HG/T 3227.2-2020 — Moulds for tyre covers - Part 2: Two-piece moulds

HG/T 3227.1-2020 — Moulds for tyre covers - Part 1: Segmented moulds

HG/T 3226.2-2011 — Tyre building drums - Part 2: Expandable and collapsible drums

7 Classification and status

International classification (ICS): 71.120

Chinese Standard Classification (CCS): G 95

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of HG/T 3230

EditionTitleRevisionStatus
HG/T 3230-2009Rubber single-screw extruders - Test methodscurrent editionCurrent
HG/T 3230-1989Rubber single-screw extruders - Test methodsprevious editionSuperseded

This page sells the current edition, HG/T 3230-2009. Earlier editions are listed for reference only.

How to Download HG/T 3230-2009

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 3230-2009

$85.00